Temporary Works Engineer/ Coordinator

Description

The Temporary Works Coordinator will be responsible for coordinating the specification, design, approval, checking, installation, maintenance, and removal of all necessary temporary works, following the recommendations of BS 5975:2024 and ensuring compliance with both Principal Contractor and Internal company Temporary Works standards and procedures.

• Responsibility for putting forward Temporary Works Supervisors for appointment
• Ensure that a satisfactory Temporary Works design is carried out. Ensure that the design is independently checked for concept, structural adequacy and compliance with the brief
• Support to tender and project teams providing advice on buildability and temporary works. Record any changes to temporary works scope against the tender / contract
• Understand and apply the principals of TWC as defined in BS5975:2024, PAS8811:2017 and all other applicable standards, including Client and Principle Contractor’s TW Procedures and Technical Standards
• Provide specific briefings on the limitations of Temporary works schemes in conjunction with the designer where appropriate
• Ensure that any agreed changes or corrections of faults, are correctly carried out on site
• Register or record the drawings, calculations and other relevant documents relating to the final design. Issue designs to required parties in accordance with the document management process. Ensure TW documentation is adequately maintained within the site management systems
• Obtain the criteria that allows the temporary works to be removed. Ensure temporary load cases are adequately considered
• When it has been confirmed that the permanent structure has attained adequate strength required by the design, issue formal permission to dismantle the Temporary Works (where required dependent on project-based permissions/appointments)
• Agree with the Principle Contractor/Designers/Checkers and other Parties on the level of risk and design check
• Ensure that checks are made at appropriate stages covering the more critical factors. Ensure that any proposed changes in materials or construction are checked against the original design and appropriate action taken
• Advise the permanent works designer of any temporary conditions, or loads, that should be considered in the permanent works design
• Ensure that those responsible for on-site supervision receive full design details, with significant risks and design limitations highlighted
• Understand the Client and Principle Contractor’s Environment and Sustainability Policies, Processes and statutory requirements as they affect the company's operations and ensure that the requirements, as applicable within their discipline, are implemented on the project
• Ensure that during use all appropriate maintenance and routine inspection is carried out. Issue formal permit to load/proceed if final check(s) prove satisfactory (where required dependent on project-based permissions/appointments)
• Support with mentoring TWS’s and site engineers
• Coordinate Temporary Works activities. Ensure that a detailed design brief has been produced, with full consultation, is adequate and is in accordance with the actual situation on site

Requirements

An exciting opportunity has arisen for a Temporary Works Engineer / Temporary Works Coordinator to join our Sizewell C team. To be considered, you will come from a Construction or Civil Engineering background with FRC/Structures and Temporary works experience. The ideal candidate will have to hold a full UK driving licence, as travel between sites is necessary.

• Ability to demonstrate the right behaviours and work both independently and as part of a team
• Engineering ability – technical and practical engineering skills.
• Good knowledge of CDM regulations
• CITB TWC (can be provided)
• CSCS card
• Experience relevant to the type and complexity of the TW with which they are involved.
• Interpersonal skills and communication
• Some Temporary Works and FRC knowledge/experience
• Computer literacy advanced
• CITB SSSTS & SMSTS
• Management and leadership skills – ability to plan and manage the TW process
• Experience in Civil Engineering, with good technical knowledge.
• Health, safety, and welfare – a sound knowledge of legislation hazards and SSW. Ability to speak up on HSEQ matters and lead by example
• Degree/HNC in Civil Engineering, or equivalent

Benefits

Training + Development

Interview process

Visa Sponsorship

Security clearance