Pile Driver

Overview

Perform marine pile driving tasks, assemble equipment, assist crane ops, and handle welding.

Key Responsibilities

• pile driving
• template setup
• hammer maintenance
• crane assembly
• tool operation
• site preparation

Tasks

-Assist during pile driving operations including, but not limited to, fabrication and installation of pile template and falsework, lofting and tripping of the pile to be driven, engagement of pile hammer onto the pile, pile advancement during pile driving, and disassembly of above-mentioned falsework and templates. -The individual may be required to lift objects with a minimum of 10 lbs. and a maximum single-person lift of 50 lbs. This could result in frequent lifting or carrying depending on project needs. -Assist in unloading and assembling cranes or other hoisting equipment for pile driving activities, including fueling, lubricating, and maintaining the pile driving hammer. -Perform site preparation for installation of various concrete and wood structures; prepares the piling to be driven and assists in positioning and driving the piling. -Assist and work with the Crane Operator to maneuver and position loads safely. -Operate a variety of hand and power tools safely and effectively to minimize the risk of injury, property damage, or loss of life, including oxygen/acetylene welding torch to cut steel plates, pipes, beams, etc., pneumatic power tools - drills, countersinks, and tuggers - as required, and/or gasoline chain saw to cut timbers and timber piling. -Dress and cap the pilings after driving and preparing them to receive the superstructure. -Unload and assemble pile driving hammer and leads in addition to various types of piling – concrete, pipe, H-piling, timber, and steel sheet piling.

Requirements

• smaw
• osha rigger
• twic
• pile driving
• crane rigging
• 3g/4g/6g

What You Bring

-The individual may occasionally be required to stand, stoop, bend, crouch, kneel, climb, or sit for long periods. -The individual frequently works near moving mechanical parts and must be able to adapt to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. -The individual may be required to work in confined spaces, climb vertical ladders of a height of 6 ft. or greater, and/or elevated heights. -Experience: 500+ hours of operating on dedicated pile. SMAW/stick welding experience. -Knowledge/Skills/Abilities (KSA): General knowledge of Marine or Railroad construction terminology. Ability to cut using a variety of cutting methods such as oxygen acetylene and/or cold cutting tools. Ability to weld in 3G, 4G, or 6G positions. -Certification(s): OSHA Rigger & Signalman training. Shielded Metal Arc Welding (SMAW) certification. -Knowledge/Skills/Abilities (KSA): General knowledge of the basic functions & operations of various types of pile hammers – diesel, hydraulic, and drop hammers. General knowledge of construction rigging, including the use of slings, cable chokers, spreader bars, multi-part load blocks, etc. Ability to perform work at elevated heights, including on man-lifts and scaffolds. Possesses strong written and verbal communication skills in English to effectively present information and respond to questions from managers, clients, and customers. -The individual must be able to perform the essential functions of the job with or without reasonable workplace accommodation. -Education: Must possess a Transportation Worker Identification Credential (TWIC) or be eligible/willing to obtain one upon hire. -Experience: Two (2) years of experience in pile driving and/or crane rigging/operations experience on land and barges. -The individual may be required to work long hours and/or weekends. Additionally, some out-of-town or overnight travel may be required. -The individual may be required to walk, step, climb, or otherwise move from one location on the job site to another, which may be of varying heights and access parameters. -The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes a hard hat, safety glasses, life vest, respirators, ear plugs, steel-toed shoes, personal floatation devices (PFD), and/or other protective equipment.

People Also Searched For

About Russell Marine Llc

-It has steadily grown from a regional heavy-civil contractor. -Strategically positioned along the Gulf Coast, the company executes waterfront projects from docks to bridges. -Equipped with crane barges up to 350 tons, it tackles complex marine jobs. -Serves both public and private clients with a competitive pricing model without sacrificing quality. -Typical projects include new dock and pier construction, bridge replacement, and loading-arm maintenance. -Its asset expansion and repeat contracts attest to a proven track record in heavy-civil marine work.

Sector Specialisms