LNG I&C Engineer

Overview

Owner's rep ensuring I&C design, construction, commissioning for LNG projects.

Key Responsibilities

• commissioning
• fat
• design review
• audit
• deliverable review
• technical assurance

Tasks

Support the commissioning and start-up of the project and will assist other engineers and respond to questions from other disciplines. Handle both project support and technical administration as dictated by the I&C Lead for the project. Provide technical assurance and guidance for all I&C and Telecommunications matters during the development and detailed design phases of the regasification, liquefaction, infrastructure, and renewable projects being developed by the client. Work as the Owner's representative in a project(s) with the primary responsibilities reviewing, auditing, and inspecting that the EPC's design and construction are fit for purpose, compliant with project specifications and regulations, industry codes and standards. Ensure that all I&C equipment is designed, purchased, inspected and installed safely and perform to the requirements of the design. -Perform work on each project assignment but may include support or work under Engineering, Construction, Q&A, Commissioning, and Start-up groups. -Support all I&C commissioning and start-up activities on-site, including SATs, loop checks, functional tests, field walk-downs, and sign-off of I&C check sheets. -Participate in Factory Acceptance Tests (FAT), inspections, IFATs. -Apply basic project management skills/ techniques and safe work/safe operations principles. -Support the field activities as an I&C engineer or inspector. This position will be 70-80% in the field and 20-30% desk time. -Provide support during all the phases as assigned, including but not limited to: writing scope of works; reviewing technical specifications, material requisitions, technical bid evaluations, construction packages, quality assurance documents, tracking project deliverables; and providing project status updates and technical support during start-up and commissioning. -Participate in design review and risk assessments such as P&ID reviews, process HAZID, HAZOP, and SIL/LOPA analysis, and alarm rationalization studies, among others. -Audit the EPC's design in all the matters related to telecommunication, instrumentation, and control systems, including those inside the vendor packages. -Monitor and provide project status updates to project I&C Lead or project management, including relevant conditions and activities that may impact the project's development, completion, or performance. -Review EPC's and suppliers' deliverables such as P&IDs, all instrumentation and telecommunication relevant documentation (instrument location plan, instrument hook-up, installation details, instrument index, logic diagrams, loop and wiring drawings, instrumentation datasheets, cause & effect diagrams, sizing calculations sheets and reports, among others). -Participate or lead special technical studies and reports as may be requested.

Requirements

• instrument controls
• deltav
• lng experience
• control systems
• valve sizing
• p&id

What You Bring

-At least 3 years of Field construction experience required. -Knowledge in valve sizing calculations. -Knowledge and understanding of in-line instrumentation, installation methods, calibration, and testing requirements. -Knowledge in Intergraph Smart Instrumentation (formerly known as SPI or INtools). -Experience in systems and control engineering required. -Must be able to conduct economic analysis and prepare budgetary estimates. -Knowledge in Gas Chromatographs, CEMS, Gas Metering Stations. -Basic knowledge of the life cycle of an LNG project and the project management and execution process. Understands key activities, milestones and deliverables at each project stage and factors that may impact the development completion of project/facility. -Experience in commissioning and start-up preferred. -Full use and application of standard I&C engineering principles/techniques. Sound understanding of engineering design and construction techniques in other related disciplines. Full use and application of relevant codes and technologies. -Proficient in Microsoft Office. -Advanced technical knowledge in designing, engineering, and specifying telecommunications, control systems, and instrumentation such as BPCS, SIS, Fire and Gas, HIPPS, Anti-surge systems, gas metering skids, in-line instrumentation, control valves, ESDVs, pressure relief valves, and gas chromatographs. -Bachelor’s degree in Instrument & Controls Engineering required; Electronics, Electrical and/or Process Engineering preferred. -Experience with control systems installed in clients’ projects is preferred: Emerson DeltaV, DeltaV SIS, ICS triplex, Triconex, Controllogix, CCC Series 5, MarkVie, MarkVieS and Det-tronics EQP, BN 3500 required. -Knowledge in the codes and standards used in the LNG industry such as API, BS, ISO, ASME, ANSI, IEC, ISA. Must possess solid knowledge of NFPA 59A, NFPA 72, NFPA 70 standards, knowledge of ANSI/ISA-18.2, Management of Alarm Systems for the Process Industries, knowledge of ISA/IEC 61511 Safety Instrumented Systems. -5+ years of experience in LNG, Cryogenic, or Oil & Gas plants required. -Experience with control and safeguarding systems for standard centrifugal compressors equipment used in LNG plants required. -Working knowledge of project development and understanding of P&ID's, PFD's, controls systems, control systems schematics, control diagrams, control narratives, complex loops, loop diagrams, cause & effects.

People Also Searched For

About Airswift

-Operates from hubs in Houston, Manchester, and Singapore, serving clients across STEM industries worldwide. -Delivers talent acquisition, global employment & mobility, managed solutions, and consulting services. -Supports complex assignments, from offshore engineering to major urban infrastructure deployments. -Known for a vast talent network—thousands of contractors and deep sector expertise in energy and infrastructure.

Sector Specialisms