Sr. Welder B - 2nd Shift at Taco, Inc. in Fall River, MA | USD29-31 | Kablio

Role

Description

fcaw welding

gmaw welding

fit-up

erp records

quality monitoring

safety compliance

The Senior Welder B performs a variety of routine welding duties. They typically weld nozzles and fittings to tanks and heat exchanger shells and will fit up nozzles or similar components on standard products using jigs and fixtures. This role welds using gas metal arc welding (GMAW) and flux cored arc welding (FCAW) processes on fillet joints and groove joints with or without backing.

Performs standardized final welding operations and fit up work using fixtures and jigs to weld tanks and heat exchangers primarily using the FCAW/GMAW welding process, with or without backing, in the flat and horizontal positions.
Fosters conditions that allow people and communities to reach their full potential
Maintains work area in neat, clean, and orderly condition and observes all safety regulations and practices.
Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to.
With assistance and supervision, may perform more complicated welding using various equipment.
Maintains necessary records, completes transactions within the Enterprise Resource Planning (ERP) system and accesses company intranet as needed for work instructions.
Timely completion of all welding operations within the operational time limits and according to Taco’s quality protocols.
Monitors quality of work, makes corrective adjustments and reports equipment malfunctions, defective materials or other unusual conditions to supervisor.
Uses various types of welding equipment and a variety of common hand and power tools.

Requirements

asme ix

fcaw/gmaw

saw

pressure vessel

welding diploma

erp

This position works primarily in a production floor environment where large equipment and noise are prevalent. Safety gear is required in these areas.

Ability to follow verbal and written instructions and effectively apply to assigned work
Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding test with the following variables:FCAW/GMAW and submerged -arc welding (SAW) processesSteel-steel and stainless-stainless materialFlat and horizontal positionsWith or without backing
Experience welding in a pressure vessel fabrication shop
Ability to perform repetitive work requiring constant alertness or activity, and including standing and lifting
Graduate of a welding and fabrication vocational or technical training program
Works from standard drawings, specifications, WPS and verbal instructions.
Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within.
2+ years of welding experience using drawings, specifications, charts and welding equipment.
Requires judgment to comply with instructions, prescribed routines, methods and practices
Ability to manage time effectively to meet strict time deadlines and production volumes
Read and interpret basic drawings and perform simple layouts.
Ability to navigate multiple windows in company ERP system to access production and resource data
Is mindful about family, health and well-being
Capability of welding fillet and groove welds without backing in both the horizontal and flat positions.
Minimal/No travel required
FCAW/GMAW and submerged -arc welding (SAW) processes
High school diploma or equivalent

Benefits

Full compensation packages are based on candidate experience and certifications.

Salary range: $29.56 USD - $31.71 USD

With nearly 1,000 people working at Taco worldwide, each with their own story, you will discover a sense of community and diverse, intelligent colleagues who help us innovate, create and explore.

Offers tuition reimbursement, career development, and on-site training programs in our learning center
Provides competitive salaries and benefits

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

Information not given or found

Security clearance

Information not given or found

Company

Overview

1920

Year Founded

The company was established in 1920, marking its journey as a century-old innovator in hydronic flow-control systems.

It engineers pumps, valves, tanks, heat exchangers and electronic controls for efficient water-driven solutions.
Originally focused on HVAC heating and cooling, it rebranded and diversified into plumbing, agriculture and industrial markets.
With global operations spanning North America, Europe and Asia, Taco claims a strong presence across diverse sectors.
Landmark projects include high‑efficiency ECM circulators (00e Series) and smart plumbing systems delivering instant hot water.
Strategic acquisitions—like Italian pump maker Askoll—expanded its reach into European hydronics.
Its Hydroflo division supplies robust pumps for irrigation, mining and agriculture, standing out in non‑comfort markets.
A privately held, family‑owned manufacturer, it blends U.S. production with global scale and tailored engineering solutions.

Culture + Values

People First: We value every relationship. Within our team and among our customers.
Do The Right Thing: Integrity is the foundation for everything we do. So we do what is right — even when no one is watching.
Always Optimistic: We look at things with a positive eye and an open mind and always try to see the good in something first.
Authentic: We celebrate all of the nuances that make us unique. For it's our differences that make us thrive and do better when together.

Environment + Sustainability

26% Improvement

Building Performance

Achieved a 26% improvement in baseline building performance at the LEED Gold certified Innovation Development Center.

35% Green Power

Green Power Purchase

Purchased 35% green power for both the Innovation Development Center and Distribution Facility.

75% Waste Diverted

Construction Waste

75% of construction waste was diverted from landfill at the Innovation Development Center.

0% Net-Zero

Net-Zero Target

Currently, no publicly stated net-zero target date is available.

Committed to being good environmental stewards: 'obligated to respect the environment, to protect it, and help restore it in whatever way we can through the choices we make as a company.'

Inclusion & Diversity

58% Female, 42% Male

Gender Diversity

The employee population reflects a balanced gender distribution with 58% female and 42% male representation.

50% White, 32.5% Hispanic/Latino, 9.2% Black/African-American, 4.9% Asian

Ethnic Diversity

The employee population reflects a diverse ethnic composition, including significant representation from multiple communities.

Turnover <1%

Employee Retention

The company maintains a low employee turnover rate, significantly below the industry average.

Provides tuition reimbursement, career development, on-site training, and a global Manager Development Program in partnership with DDI/DiSC.
Affirms equal opportunity in hiring regardless of race, gender, sexual orientation, gender identity and expression, age, disability or veteran status.

Articles

Taco, Inc. Overview

LinkedIn - Taco, Inc.

Role

Description

fcaw welding

gmaw welding

fit-up

erp records

quality monitoring

safety compliance

Performs standardized final welding operations and fit up work using fixtures and jigs to weld tanks and heat exchangers primarily using the FCAW/GMAW welding process, with or without backing, in the flat and horizontal positions.
Fosters conditions that allow people and communities to reach their full potential
Maintains work area in neat, clean, and orderly condition and observes all safety regulations and practices.
Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to.
With assistance and supervision, may perform more complicated welding using various equipment.
Maintains necessary records, completes transactions within the Enterprise Resource Planning (ERP) system and accesses company intranet as needed for work instructions.
Timely completion of all welding operations within the operational time limits and according to Taco’s quality protocols.
Monitors quality of work, makes corrective adjustments and reports equipment malfunctions, defective materials or other unusual conditions to supervisor.
Uses various types of welding equipment and a variety of common hand and power tools.

Requirements

asme ix

fcaw/gmaw

saw

pressure vessel

welding diploma

erp

This position works primarily in a production floor environment where large equipment and noise are prevalent. Safety gear is required in these areas.

Ability to follow verbal and written instructions and effectively apply to assigned work
Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding test with the following variables:FCAW/GMAW and submerged -arc welding (SAW) processesSteel-steel and stainless-stainless materialFlat and horizontal positionsWith or without backing
Experience welding in a pressure vessel fabrication shop
Ability to perform repetitive work requiring constant alertness or activity, and including standing and lifting
Graduate of a welding and fabrication vocational or technical training program
Works from standard drawings, specifications, WPS and verbal instructions.
Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within.
2+ years of welding experience using drawings, specifications, charts and welding equipment.
Requires judgment to comply with instructions, prescribed routines, methods and practices
Ability to manage time effectively to meet strict time deadlines and production volumes
Read and interpret basic drawings and perform simple layouts.
Ability to navigate multiple windows in company ERP system to access production and resource data
Is mindful about family, health and well-being
Capability of welding fillet and groove welds without backing in both the horizontal and flat positions.
Minimal/No travel required
FCAW/GMAW and submerged -arc welding (SAW) processes
High school diploma or equivalent

Benefits

Full compensation packages are based on candidate experience and certifications.

Salary range: $29.56 USD - $31.71 USD

With nearly 1,000 people working at Taco worldwide, each with their own story, you will discover a sense of community and diverse, intelligent colleagues who help us innovate, create and explore.

Offers tuition reimbursement, career development, and on-site training programs in our learning center
Provides competitive salaries and benefits

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

Information not given or found

Security clearance

Information not given or found

Company

Overview

1920

Year Founded

The company was established in 1920, marking its journey as a century-old innovator in hydronic flow-control systems.

It engineers pumps, valves, tanks, heat exchangers and electronic controls for efficient water-driven solutions.
Originally focused on HVAC heating and cooling, it rebranded and diversified into plumbing, agriculture and industrial markets.
With global operations spanning North America, Europe and Asia, Taco claims a strong presence across diverse sectors.
Landmark projects include high‑efficiency ECM circulators (00e Series) and smart plumbing systems delivering instant hot water.
Strategic acquisitions—like Italian pump maker Askoll—expanded its reach into European hydronics.
Its Hydroflo division supplies robust pumps for irrigation, mining and agriculture, standing out in non‑comfort markets.
A privately held, family‑owned manufacturer, it blends U.S. production with global scale and tailored engineering solutions.

Culture + Values

People First: We value every relationship. Within our team and among our customers.
Do The Right Thing: Integrity is the foundation for everything we do. So we do what is right — even when no one is watching.
Always Optimistic: We look at things with a positive eye and an open mind and always try to see the good in something first.
Authentic: We celebrate all of the nuances that make us unique. For it's our differences that make us thrive and do better when together.

Environment + Sustainability

26% Improvement

Building Performance

Achieved a 26% improvement in baseline building performance at the LEED Gold certified Innovation Development Center.

35% Green Power

Green Power Purchase

Purchased 35% green power for both the Innovation Development Center and Distribution Facility.

75% Waste Diverted

Construction Waste

75% of construction waste was diverted from landfill at the Innovation Development Center.

0% Net-Zero

Net-Zero Target

Currently, no publicly stated net-zero target date is available.

Committed to being good environmental stewards: 'obligated to respect the environment, to protect it, and help restore it in whatever way we can through the choices we make as a company.'

Inclusion & Diversity

58% Female, 42% Male

Gender Diversity

The employee population reflects a balanced gender distribution with 58% female and 42% male representation.

50% White, 32.5% Hispanic/Latino, 9.2% Black/African-American, 4.9% Asian

Ethnic Diversity

The employee population reflects a diverse ethnic composition, including significant representation from multiple communities.

Turnover <1%

Employee Retention

The company maintains a low employee turnover rate, significantly below the industry average.

Provides tuition reimbursement, career development, on-site training, and a global Manager Development Program in partnership with DDI/DiSC.
Affirms equal opportunity in hiring regardless of race, gender, sexual orientation, gender identity and expression, age, disability or veteran status.

Articles

Taco, Inc. Overview

LinkedIn - Taco, Inc.