Eaton Development Program: Power System Controls Engineer at Eaton in Cleveland, OH | USD75,000-75,000 | Kablio

Role

Description

electrical safety

system validation

safety compliance

control schemes

scada development

generator control

Practices electrical safety measures.
Validate system contains proper controls, metering and monitoring. Controls include Power meters, automation equipment (PLC/HMI), protective relays, load sharing, synchronization, etc. per approved drawing package while in factory setting.
Successfully complete and maintain compliance with Eaton’s safety program and policy; This includes role-applicable portions of the EESS Qualified Electrical Worker (QEW) program and any required annual re-certifications thereafter.
Write and deploy complex power transfer and other control schemes including Main-Tie-Main transfer schemes, load shedding/ peak shaving schemes, breaker control schemes, SCADA system development, and generator control.

Requirements

plc programming

hmi

windows os

electrical engineering

networking

industrial protocols

Must be geographically flexible to relocate within the United States
Knowledge of troubleshooting, test and repair techniques.
Performs physically demanding tasks, requirement to stand, walk, stoop, squat, kneel, and reach above, to, and below shoulder level, lift, carry, push, pull, and use hands to handle and feel. Frequently required to climb and regularly required to lift/carry/push/pull up to 50 pounds; occasionally required to push/pull greater than 50 pounds with assistance. May be required to drive extended distances, work in extreme weather and temperature conditions, work at sites with areas that have poor lighting, ventilation, and dust and/or be exposed to high noise levels.
Prior work experience within the electrical/power industry
This position requires you to drive an Eaton vehicle.
Must be able and willing to obtain Department of Transportation (DOT) non-CDL qualification and comply with all DOT regulatory requirements, if required.
Ability to interface with internal and external customers, salespeople, and other team members on a technical level.
Tangible Learning: See firsthand how Eaton is powering the future of Power Distribution through real world application and customer service.
Experience programming PLCs
Strong computer skills required with Windows Operating Systems and Databases.
Degree in technical engineering (Electrical/Computer Engineering, Computer Science or Mechanical Engineering) from an accredited institution
Bachelor’s or master’s degree in engineering from an accredited institution, with graduation date before August of 2026
Experience with HMI (Human Machine Interface) software and power monitoring software packages.
Minimum overall cumulative GPA of 2.8
Must have the ability to work variable hours, including nights & weekends, and travel within the district/state/region/country based on customer requirements.
Knowledge of power quality meters, trip units, protective relays and UPS
Overall cumulative GPA of 3.2 or higher
Minimum of one internship/co-op experience or an equivalent 3 months of experience in a technician or maintenance role working on or with machines, vehicles or large equipment
Demonstrated leadership experience within campus and/or community
Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
Has demonstrated ability to provide service and represent company interests in developing customer relationships to assure long-term customer satisfaction.
Intermediate Networking skills including the ability to troubleshoot network hardware and interfaces, including Ethernet and Fiber
Working knowledge of industrial communication protocols such as Modbus, SNMP, OPC, DDE, TCP/IP.
Experience in testing, troubleshooting, evaluating, and servicing electrical distribution and control systems
Working knowledge of test equipment and diagnostic instruments for automation and power management systems.
Program Programmable Logic Controllers (PLC’s)
Excellent interpersonal and communication/presentation skills
Must have a valid driver's license and be able to pass a Motor Vehicle Record (MVR) check

Benefits

Global Perspectives: Diverse work locations and comprehensive customer portfolios are a required part of the adventure, enhancing your learning and maximizing program benefits.
Guaranteed 40-hour base pay, eligible for pay and travel premiums
Personalized Program Experience: We’re committed to energizing your career and empowering your impact. No two participants share the same experience or set of responsibilities.
Strategic Networking: Benefit from networking and mentorship opportunities within one of North America's largest and most experienced power distribution service organizations.
Role Exploration: Gain insight into various careers within Eaton through extensive services that ensure safe, efficient, and reliable power systems at every stage.
Leads program with bonus pay
Opportunities across 32 service branches
Tuition assistance for ongoing learning
Career growth, mentorship and safety training
Company vehicle, toolkit, and phone

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

no visa sponsorship or immigration support will be provided.

Security clearance

must pass a motor vehicle record (mvr) check.

Company

Overview

Over 100 years

Years in operation

The company has been operational for over a century, demonstrating its long-standing presence in the industry.

Over 175 countries

Countries Operated

Eaton operates its business across 175 countries, showcasing its global reach and influence.

global leader in power management, providing energy-efficient solutions for managing electrical, hydraulic, and mechanical power.
products and services span across industrial, commercial, residential, and infrastructure markets.
innovative solutions in energy storage, electrical distribution, and industrial automation.
instrumental in advancing technologies for utilities, transportation, and energy management.
recent standout projects include large-scale energy management systems for smart cities and utilities.
systems are crucial for sectors ranging from renewable energy to water resources management.
history of growth through acquisitions, continuously expanding global footprint and product offerings.

Culture + Values

Develop employees by helping them succeed not just at work, but in life as well
Delight customers by understanding their challenges and delivering real solutions proactively
Deliver for shareholders by doing what's right
Support communities by offering time and talent to meet social and economic needs
We are ethical
We are passionate
We are accountable
We are efficient
We are transparent
We learn
Doing Business Right reflects unwavering commitment to highest ethical practices and standards of behavior
Our brand promise: we make what matters work

Environment + Sustainability

31% GHG Reduction

Operational Emissions Reduced

The company has reduced its operational greenhouse gas emissions by 31% since 2018, amounting to 302,845 metric tons of CO2 equivalents.

Carbon Neutral by 2030

Commitment to Carbon Neutrality

The company aims to achieve carbon-neutral operations by 2030, focusing on reducing carbon emissions across all operational activities.

58M Metric Tons (Scope 3)

Scope 3 Emissions in 2023

In 2023, the company reported Scope 3 greenhouse gas emissions of 58,449,862 metric tons of CO2 equivalents, reflecting emissions from the entire value chain.

$3B Invested

Sustainable R&D Funding

The company has committed over $3 billion to research and development for sustainable solutions, highlighting its investment in eco-friendly innovations.

Aiming to reduce Scope 1 and Scope 2 GHG emissions by 50% by 2030 compared to 2018 levels.
Targeting a 15% reduction in Scope 3 emissions by 2030 from 2018 levels.
Achieving zero-waste-to-landfill certification for 79% of manufacturing sites, up from 75% in 2022, with a 2030 target of 100%.
Certifying 16% of manufacturing sites as zero-water-discharge, surpassing the 2030 target of 10% for water-stressed sites.
Independent verification of Scope 1 and Scope 2 GHG data with reasonable assurance and Scope 3 data with limited assurance.
Deploying clean-energy projects such as solar microgrids, PV installations, and carports, reducing over 20,000 metric tons of CO2 equivalents annually.

Inclusion & Diversity

28% Women

Representation in Salaried Roles

Women make up nearly 28% of salaried positions, striving toward a 2030 goal of 40%.

24% Minorities

U.S. Minority Representation

U.S. minorities comprise over 24% of salaried positions, aiming for 34% by 2030.

54% Leadership

Global Leadership Team Composition

Over half of the global leadership team are U.S. minorities.

2/3 Board

Board Member Diversity

Two-thirds of Board members identify as women or U.S. minorities.

10K Members

Inclusion Resource Groups

Eight Inclusion Eaton Resource Groups (iERGs) serve over 10,500 members globally.

100% Equality

Disability Equality Index

Received a perfect score of 100 on the Disability Equality Index for three consecutive years.

100% Equality

HRC Corporate Equality Index

Achieved a perfect score of 100% on the HRC Corporate Equality Index for eight consecutive years.

Company-wide pay equity assurance processes are in place for U.S. minority and global gender pay equity.
Eight Inclusion Eaton Resource Groups (iERGs) are present in 60 countries.
Awarded as one of the Best Companies for Women in India by Avtar & Seramount.
Received multiple global inclusion awards for commitment to diversity and inclusion.

Articles

Eaton’s Electrical Engineering Services & Systems

Turnkey electrical solutions

Transmission and distribution automation solutions

Role

Description

electrical safety

system validation

safety compliance

control schemes

scada development

generator control

Practices electrical safety measures.
Validate system contains proper controls, metering and monitoring. Controls include Power meters, automation equipment (PLC/HMI), protective relays, load sharing, synchronization, etc. per approved drawing package while in factory setting.
Successfully complete and maintain compliance with Eaton’s safety program and policy; This includes role-applicable portions of the EESS Qualified Electrical Worker (QEW) program and any required annual re-certifications thereafter.
Write and deploy complex power transfer and other control schemes including Main-Tie-Main transfer schemes, load shedding/ peak shaving schemes, breaker control schemes, SCADA system development, and generator control.

Requirements

plc programming

hmi

windows os

electrical engineering

networking

industrial protocols

Must be geographically flexible to relocate within the United States
Knowledge of troubleshooting, test and repair techniques.
Performs physically demanding tasks, requirement to stand, walk, stoop, squat, kneel, and reach above, to, and below shoulder level, lift, carry, push, pull, and use hands to handle and feel. Frequently required to climb and regularly required to lift/carry/push/pull up to 50 pounds; occasionally required to push/pull greater than 50 pounds with assistance. May be required to drive extended distances, work in extreme weather and temperature conditions, work at sites with areas that have poor lighting, ventilation, and dust and/or be exposed to high noise levels.
Prior work experience within the electrical/power industry
This position requires you to drive an Eaton vehicle.
Must be able and willing to obtain Department of Transportation (DOT) non-CDL qualification and comply with all DOT regulatory requirements, if required.
Ability to interface with internal and external customers, salespeople, and other team members on a technical level.
Tangible Learning: See firsthand how Eaton is powering the future of Power Distribution through real world application and customer service.
Experience programming PLCs
Strong computer skills required with Windows Operating Systems and Databases.
Degree in technical engineering (Electrical/Computer Engineering, Computer Science or Mechanical Engineering) from an accredited institution
Bachelor’s or master’s degree in engineering from an accredited institution, with graduation date before August of 2026
Experience with HMI (Human Machine Interface) software and power monitoring software packages.
Minimum overall cumulative GPA of 2.8
Must have the ability to work variable hours, including nights & weekends, and travel within the district/state/region/country based on customer requirements.
Knowledge of power quality meters, trip units, protective relays and UPS
Overall cumulative GPA of 3.2 or higher
Minimum of one internship/co-op experience or an equivalent 3 months of experience in a technician or maintenance role working on or with machines, vehicles or large equipment
Demonstrated leadership experience within campus and/or community
Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
Has demonstrated ability to provide service and represent company interests in developing customer relationships to assure long-term customer satisfaction.
Intermediate Networking skills including the ability to troubleshoot network hardware and interfaces, including Ethernet and Fiber
Working knowledge of industrial communication protocols such as Modbus, SNMP, OPC, DDE, TCP/IP.
Experience in testing, troubleshooting, evaluating, and servicing electrical distribution and control systems
Working knowledge of test equipment and diagnostic instruments for automation and power management systems.
Program Programmable Logic Controllers (PLC’s)
Excellent interpersonal and communication/presentation skills
Must have a valid driver's license and be able to pass a Motor Vehicle Record (MVR) check

Benefits

Global Perspectives: Diverse work locations and comprehensive customer portfolios are a required part of the adventure, enhancing your learning and maximizing program benefits.
Guaranteed 40-hour base pay, eligible for pay and travel premiums
Personalized Program Experience: We’re committed to energizing your career and empowering your impact. No two participants share the same experience or set of responsibilities.
Strategic Networking: Benefit from networking and mentorship opportunities within one of North America's largest and most experienced power distribution service organizations.
Role Exploration: Gain insight into various careers within Eaton through extensive services that ensure safe, efficient, and reliable power systems at every stage.
Leads program with bonus pay
Opportunities across 32 service branches
Tuition assistance for ongoing learning
Career growth, mentorship and safety training
Company vehicle, toolkit, and phone

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

no visa sponsorship or immigration support will be provided.

Security clearance

must pass a motor vehicle record (mvr) check.

Company

Overview

Over 100 years

Years in operation

The company has been operational for over a century, demonstrating its long-standing presence in the industry.

Over 175 countries

Countries Operated

Eaton operates its business across 175 countries, showcasing its global reach and influence.

global leader in power management, providing energy-efficient solutions for managing electrical, hydraulic, and mechanical power.
products and services span across industrial, commercial, residential, and infrastructure markets.
innovative solutions in energy storage, electrical distribution, and industrial automation.
instrumental in advancing technologies for utilities, transportation, and energy management.
recent standout projects include large-scale energy management systems for smart cities and utilities.
systems are crucial for sectors ranging from renewable energy to water resources management.
history of growth through acquisitions, continuously expanding global footprint and product offerings.

Culture + Values

Develop employees by helping them succeed not just at work, but in life as well
Delight customers by understanding their challenges and delivering real solutions proactively
Deliver for shareholders by doing what's right
Support communities by offering time and talent to meet social and economic needs
We are ethical
We are passionate
We are accountable
We are efficient
We are transparent
We learn
Doing Business Right reflects unwavering commitment to highest ethical practices and standards of behavior
Our brand promise: we make what matters work

Environment + Sustainability

31% GHG Reduction

Operational Emissions Reduced

The company has reduced its operational greenhouse gas emissions by 31% since 2018, amounting to 302,845 metric tons of CO2 equivalents.

Carbon Neutral by 2030

Commitment to Carbon Neutrality

The company aims to achieve carbon-neutral operations by 2030, focusing on reducing carbon emissions across all operational activities.

58M Metric Tons (Scope 3)

Scope 3 Emissions in 2023

In 2023, the company reported Scope 3 greenhouse gas emissions of 58,449,862 metric tons of CO2 equivalents, reflecting emissions from the entire value chain.

$3B Invested

Sustainable R&D Funding

The company has committed over $3 billion to research and development for sustainable solutions, highlighting its investment in eco-friendly innovations.

Aiming to reduce Scope 1 and Scope 2 GHG emissions by 50% by 2030 compared to 2018 levels.
Targeting a 15% reduction in Scope 3 emissions by 2030 from 2018 levels.
Achieving zero-waste-to-landfill certification for 79% of manufacturing sites, up from 75% in 2022, with a 2030 target of 100%.
Certifying 16% of manufacturing sites as zero-water-discharge, surpassing the 2030 target of 10% for water-stressed sites.
Independent verification of Scope 1 and Scope 2 GHG data with reasonable assurance and Scope 3 data with limited assurance.
Deploying clean-energy projects such as solar microgrids, PV installations, and carports, reducing over 20,000 metric tons of CO2 equivalents annually.

Inclusion & Diversity

28% Women

Representation in Salaried Roles

Women make up nearly 28% of salaried positions, striving toward a 2030 goal of 40%.

24% Minorities

U.S. Minority Representation

U.S. minorities comprise over 24% of salaried positions, aiming for 34% by 2030.

54% Leadership

Global Leadership Team Composition

Over half of the global leadership team are U.S. minorities.

2/3 Board

Board Member Diversity

Two-thirds of Board members identify as women or U.S. minorities.

10K Members

Inclusion Resource Groups

Eight Inclusion Eaton Resource Groups (iERGs) serve over 10,500 members globally.

100% Equality

Disability Equality Index

Received a perfect score of 100 on the Disability Equality Index for three consecutive years.

100% Equality

HRC Corporate Equality Index

Achieved a perfect score of 100% on the HRC Corporate Equality Index for eight consecutive years.

Company-wide pay equity assurance processes are in place for U.S. minority and global gender pay equity.
Eight Inclusion Eaton Resource Groups (iERGs) are present in 60 countries.
Awarded as one of the Best Companies for Women in India by Avtar & Seramount.
Received multiple global inclusion awards for commitment to diversity and inclusion.

Articles

Eaton’s Electrical Engineering Services & Systems

Turnkey electrical solutions

Transmission and distribution automation solutions