Component Design Engineer – Turbomachinery (Fans, Compressors, Combustors, and Turbines) at Rolls-Royce in Indianapolis, IN | USD90,985-147,850 | Kablio

Role

Description

production support

failure analysis

supplier review

validation plans

design definition

gd&t

Support manufacturing, assembly, service, and aftermarket issues promptly as they arise to keep production on target and the fleet in operation.
Perform a leadership role in investigations of in-service and/or development hardware issues including Engine Investigations, failure analysis, root cause / corrective action (RCCA), Technical Variance consultation, reporting, and documentation. Share findings with the global turbomachinery team in accordance with export control regulations.
Support the supply chain in procuring hardware including review of supplier documentation, assessment of non-conforming hardware, and review of supplier change proposals.
Review and approve component requirements for their responsible sub-system’s hardware. Develop, approve, and execute validation plans to demonstrate compliance to the requirements.
Create component design definition in accordance with module, system, and customer interface requirements.
Create dimensional tolerance stacks, establish Geometric Dimensioning & Tolerancing (GD&T) requirements, and support manufacturing to produce conforming hardware.
Present and defend design solutions and technical work to program leadership and other stakeholders.

Requirements

master's

siemens nx

ansys

gd&t

programming

turbine design

A Master’s degree in Mechanical and/or Aerospace Engineering OR;
Experience working with Siemens NX, Teamcenter and/or ANSYS Workbench.
Experience with the definition release process and GD&T.
To be considered for this opportunity, you must be a US Citizen or permanent resident.
Experience with coatings and their application within turbine and hot section systems.
Experience with computer programming and design optimization.
Broader experience with rotating and static component design in highly stressed or critical assemblies.
Experience with turbine component design methods and practices to include component integrity, Structural Analysis, Thermals and Lifing spreadsheets.
A Bachelor’s degree in Engineering with 2+ years of experience in design engineering, Mechanical and/or Aerospace Engineering OR;
JD/PHD in Engineering.
Experience working with manufacturing and/or quality, especially with regards to the assessment of non-conforming hardware.

Benefits

Information not given or found

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

Information not given or found

Security clearance

Information not given or found

Company

Overview

£18.9 billion

Revenue

The company achieved near £18.9 billion in revenue in 2024.

£2.9 billion

Operating Profit

The company reported an operating profit of approximately £2.9 billion in 2024.

36%

Market Share

The company holds a commercial engine market share of roughly 36%. This reflects its strong position in the sector.

25 vehicles/day

Production Rate

The company's Goodwood facility produces approximately 25 ultra-luxury electric vehicles per day under a BMW licence.

Founded in the early 20th century, it began as a pioneer in aero-engine design and has grown into a global engineering powerhouse.
It develops and produces engines and power systems for commercial and military aircraft, naval vessels, submarines, and energy infrastructure.
Headquartered in London, it operates across four core segments—civil aerospace, defence, power systems and emerging markets like nuclear and modular reactors.
It supports iconic programmes—supplying wide-body commercial aircraft engines, submarine nuclear reactors, naval propulsion, and bespoke industrial power units.
Amid a major turnaround since 2023, the company secured a £9 billion UK defence reactor deal.

Culture + Values

We do the right thing – We do what’s right for our customers, our people, and society.
We aim high – We stretch our ambition, we set challenging goals, and we deliver results.
We take ownership – We take personal responsibility for our actions, performance, and results.
We act with integrity – We build trust by being honest, transparent, and ethical in everything we do.
We collaborate – We work together with respect, trust, and inclusiveness to achieve our goals.

Environment + Sustainability

Net-zero by 2050

Carbon Neutrality Goal

Aims to achieve net-zero carbon emissions by 2050.

Carbon intensity down by 25%

Carbon Intensity Reduction Target

Committed to reducing the carbon intensity of products and operations by 25% by 2030.

CO2 emissions reduced by 50%

SAF Emissions Reduction

SAF strategy targets a 50% reduction in CO2 emissions from flight by 2050.

Engaged in development of hybrid-electric and fully-electric propulsion systems to reduce environmental impact.
Focus on reducing waste and resource consumption across the entire supply chain.

Inclusion & Diversity

30% by 2030

Female Leadership Target

Aims to achieve 30% female representation in senior leadership positions.

26% workforce

Gender Representation

Women currently account for 26% of the global workforce as of 2023.

Set a goal to increase representation of ethnic minorities in senior roles.
Implemented initiatives to promote a more inclusive work environment, including mentorship programs and leadership development for underrepresented groups.

Articles

R2 Factory – digital transformation community

Rolls‑Royce Motor Cars PressClub

Rolls‑Royce at Global Space Congress – supplier info

Role

Description

production support

failure analysis

supplier review

validation plans

design definition

gd&t

Support manufacturing, assembly, service, and aftermarket issues promptly as they arise to keep production on target and the fleet in operation.
Perform a leadership role in investigations of in-service and/or development hardware issues including Engine Investigations, failure analysis, root cause / corrective action (RCCA), Technical Variance consultation, reporting, and documentation. Share findings with the global turbomachinery team in accordance with export control regulations.
Support the supply chain in procuring hardware including review of supplier documentation, assessment of non-conforming hardware, and review of supplier change proposals.
Review and approve component requirements for their responsible sub-system’s hardware. Develop, approve, and execute validation plans to demonstrate compliance to the requirements.
Create component design definition in accordance with module, system, and customer interface requirements.
Create dimensional tolerance stacks, establish Geometric Dimensioning & Tolerancing (GD&T) requirements, and support manufacturing to produce conforming hardware.
Present and defend design solutions and technical work to program leadership and other stakeholders.

Requirements

master's

siemens nx

ansys

gd&t

programming

turbine design

A Master’s degree in Mechanical and/or Aerospace Engineering OR;
Experience working with Siemens NX, Teamcenter and/or ANSYS Workbench.
Experience with the definition release process and GD&T.
To be considered for this opportunity, you must be a US Citizen or permanent resident.
Experience with coatings and their application within turbine and hot section systems.
Experience with computer programming and design optimization.
Broader experience with rotating and static component design in highly stressed or critical assemblies.
Experience with turbine component design methods and practices to include component integrity, Structural Analysis, Thermals and Lifing spreadsheets.
A Bachelor’s degree in Engineering with 2+ years of experience in design engineering, Mechanical and/or Aerospace Engineering OR;
JD/PHD in Engineering.
Experience working with manufacturing and/or quality, especially with regards to the assessment of non-conforming hardware.

Benefits

Information not given or found

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

Information not given or found

Security clearance

Information not given or found

Company

Overview

£18.9 billion

Revenue

The company achieved near £18.9 billion in revenue in 2024.

£2.9 billion

Operating Profit

The company reported an operating profit of approximately £2.9 billion in 2024.

36%

Market Share

The company holds a commercial engine market share of roughly 36%. This reflects its strong position in the sector.

25 vehicles/day

Production Rate

The company's Goodwood facility produces approximately 25 ultra-luxury electric vehicles per day under a BMW licence.

Founded in the early 20th century, it began as a pioneer in aero-engine design and has grown into a global engineering powerhouse.
It develops and produces engines and power systems for commercial and military aircraft, naval vessels, submarines, and energy infrastructure.
Headquartered in London, it operates across four core segments—civil aerospace, defence, power systems and emerging markets like nuclear and modular reactors.
It supports iconic programmes—supplying wide-body commercial aircraft engines, submarine nuclear reactors, naval propulsion, and bespoke industrial power units.
Amid a major turnaround since 2023, the company secured a £9 billion UK defence reactor deal.

Culture + Values

We do the right thing – We do what’s right for our customers, our people, and society.
We aim high – We stretch our ambition, we set challenging goals, and we deliver results.
We take ownership – We take personal responsibility for our actions, performance, and results.
We act with integrity – We build trust by being honest, transparent, and ethical in everything we do.
We collaborate – We work together with respect, trust, and inclusiveness to achieve our goals.

Environment + Sustainability

Net-zero by 2050

Carbon Neutrality Goal

Aims to achieve net-zero carbon emissions by 2050.

Carbon intensity down by 25%

Carbon Intensity Reduction Target

Committed to reducing the carbon intensity of products and operations by 25% by 2030.

CO2 emissions reduced by 50%

SAF Emissions Reduction

SAF strategy targets a 50% reduction in CO2 emissions from flight by 2050.

Engaged in development of hybrid-electric and fully-electric propulsion systems to reduce environmental impact.
Focus on reducing waste and resource consumption across the entire supply chain.

Inclusion & Diversity

30% by 2030

Female Leadership Target

Aims to achieve 30% female representation in senior leadership positions.

26% workforce

Gender Representation

Women currently account for 26% of the global workforce as of 2023.

Set a goal to increase representation of ethnic minorities in senior roles.
Implemented initiatives to promote a more inclusive work environment, including mentorship programs and leadership development for underrepresented groups.

Articles

R2 Factory – digital transformation community

Rolls‑Royce Motor Cars PressClub

Rolls‑Royce at Global Space Congress – supplier info