Welder A - 1st Shift at Taco, Inc. in Fall River, MA | USD32-34 | Kablio

Role

Description

welding equipment

wps interpretation

erp documentation

fit‑up welding

final welding

quality monitoring

Uses various types of welding equipment and a variety of common hand and power tools.
Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to.
Maintains necessary records, completes transactions within the Enterprise Resource Planning (ERP) system and accesses company intranet as needed for work instructions.
Performs fit up and fully welds a variety of tank and heat exchanger subassemblies including standard and custom fabrications, with minimal guidance, by reading and interpreting standard and custom part drawings.
Performs extensive final welding operations for long periods of time in awkward positions or at elevated heights.
Timely completion of all welding operations within the operational time limits and according to Taco’s quality protocols.
Maintains work area in neat, clean, and orderly condition and observes all safety regulations and practices.
Performs final welding operations on complex weldments that have been fit up by others.
Works mostly independently using drawings, specifications, WPS and verbal instructions.
Fosters conditions that allow people and communities to reach their full potential
Monitors quality of work makes corrective adjustments and reports equipment malfunctions, defective materials or other unusual conditions to Supervisor.
With assistance and supervision, may perform more complicated welding and fit up, using various equipment.
Welds full penetration welds on small diameter pipe using the gas tungsten arc welding (GTAW) process.

Requirements

fcaw/gmaw

saw

asme ix

3+ years

erp

wps

This position works primarily in a production floor environment where large equipment and noise are prevalent. Safety gear is required in these areas.

The Welder A performs a variety of standardized as well as customized welding duties on standard and nonstandard parts. Performs less complex custom weldment fit up using the gas metal arc welding/flux cored arc welding (GMAW/FCAW) welding processes. Must be proficient in numerous Welding Procedure Specifications (WPS) including small pipe qualification and various welding positions.

Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within.
High school diploma or equivalent
Ability to navigate multiple windows in company ERP system to access production and resource data
Capability of welding fillet and groove welds without backing in both the horizontal and flat positions.
3+ years of welding experience using drawings, specifications, charts and welding equipment
Small pipe diameter in rotated horizontal position
Minimal/No travel required
Ability to perform repetitive work requiring constant alertness or activity and including standing and lifting for extended periods of time sometimes at height of up to 10 feet
FCAW/GMAW and SAW processes
12 months experience in a pipe, pressure vessel or structural welding shop
Is mindful about family, health and well-being
Requires judgment to comply with instructions, solve problems, and the ability to solve minor technical issues without guidance
Ability to resolve minor welding and fit-up issues with minimal guidance.
Uses a scissor lift when needed to access welding work at heights.
Graduate of a welding and fabrication vocational or technical training program
Uses FCAW/GMAW welding process, with or without backing, in the flat, horizontal and vertical positions, on both steel and stainless-steel materials.
Ability to follow verbal and written instructions and effectively apply to assigned work
Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding tests with the following variables:FCAW/GMAW and SAW processesSteel-steel, steel-stainless, stainless-stainless materialFlat, horizontal and vertical positionsWith or without backingSmall pipe diameter in rotated horizontal position
Ability to manage time effectively to meet strict time deadlines and production volumes

Benefits

Salary range: $31.71 USD - $34.13 USD

With nearly 1,000 people working at Taco worldwide, each with their own story, you will discover a sense of community and diverse, intelligent colleagues who help us innovate, create and explore.

Full compensation packages are based on candidate experience and certifications.

Offers tuition reimbursement, career development, and on-site training programs in our learning center
Provides competitive salaries and benefits

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

Information not given or found

Security clearance

Information not given or found

Company

Overview

1920

Year Founded

The company was established in 1920, marking its journey as a century-old innovator in hydronic flow-control systems.

It engineers pumps, valves, tanks, heat exchangers and electronic controls for efficient water-driven solutions.
Originally focused on HVAC heating and cooling, it rebranded and diversified into plumbing, agriculture and industrial markets.
With global operations spanning North America, Europe and Asia, Taco claims a strong presence across diverse sectors.
Landmark projects include high‑efficiency ECM circulators (00e Series) and smart plumbing systems delivering instant hot water.
Strategic acquisitions—like Italian pump maker Askoll—expanded its reach into European hydronics.
Its Hydroflo division supplies robust pumps for irrigation, mining and agriculture, standing out in non‑comfort markets.
A privately held, family‑owned manufacturer, it blends U.S. production with global scale and tailored engineering solutions.

Culture + Values

People First: We value every relationship. Within our team and among our customers.
Do The Right Thing: Integrity is the foundation for everything we do. So we do what is right — even when no one is watching.
Always Optimistic: We look at things with a positive eye and an open mind and always try to see the good in something first.
Authentic: We celebrate all of the nuances that make us unique. For it's our differences that make us thrive and do better when together.

Environment + Sustainability

26% Improvement

Building Performance

Achieved a 26% improvement in baseline building performance at the LEED Gold certified Innovation Development Center.

35% Green Power

Green Power Purchase

Purchased 35% green power for both the Innovation Development Center and Distribution Facility.

75% Waste Diverted

Construction Waste

75% of construction waste was diverted from landfill at the Innovation Development Center.

0% Net-Zero

Net-Zero Target

Currently, no publicly stated net-zero target date is available.

Committed to being good environmental stewards: 'obligated to respect the environment, to protect it, and help restore it in whatever way we can through the choices we make as a company.'

Inclusion & Diversity

58% Female, 42% Male

Gender Diversity

The employee population reflects a balanced gender distribution with 58% female and 42% male representation.

50% White, 32.5% Hispanic/Latino, 9.2% Black/African-American, 4.9% Asian

Ethnic Diversity

The employee population reflects a diverse ethnic composition, including significant representation from multiple communities.

Turnover <1%

Employee Retention

The company maintains a low employee turnover rate, significantly below the industry average.

Provides tuition reimbursement, career development, on-site training, and a global Manager Development Program in partnership with DDI/DiSC.
Affirms equal opportunity in hiring regardless of race, gender, sexual orientation, gender identity and expression, age, disability or veteran status.

Articles

Taco, Inc. Overview

LinkedIn - Taco, Inc.

Role

Description

welding equipment

wps interpretation

erp documentation

fit‑up welding

final welding

quality monitoring

Uses various types of welding equipment and a variety of common hand and power tools.
Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to.
Maintains necessary records, completes transactions within the Enterprise Resource Planning (ERP) system and accesses company intranet as needed for work instructions.
Performs fit up and fully welds a variety of tank and heat exchanger subassemblies including standard and custom fabrications, with minimal guidance, by reading and interpreting standard and custom part drawings.
Performs extensive final welding operations for long periods of time in awkward positions or at elevated heights.
Timely completion of all welding operations within the operational time limits and according to Taco’s quality protocols.
Maintains work area in neat, clean, and orderly condition and observes all safety regulations and practices.
Performs final welding operations on complex weldments that have been fit up by others.
Works mostly independently using drawings, specifications, WPS and verbal instructions.
Fosters conditions that allow people and communities to reach their full potential
Monitors quality of work makes corrective adjustments and reports equipment malfunctions, defective materials or other unusual conditions to Supervisor.
With assistance and supervision, may perform more complicated welding and fit up, using various equipment.
Welds full penetration welds on small diameter pipe using the gas tungsten arc welding (GTAW) process.

Requirements

fcaw/gmaw

saw

asme ix

3+ years

erp

wps

This position works primarily in a production floor environment where large equipment and noise are prevalent. Safety gear is required in these areas.

Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within.
High school diploma or equivalent
Ability to navigate multiple windows in company ERP system to access production and resource data
Capability of welding fillet and groove welds without backing in both the horizontal and flat positions.
3+ years of welding experience using drawings, specifications, charts and welding equipment
Small pipe diameter in rotated horizontal position
Minimal/No travel required
Ability to perform repetitive work requiring constant alertness or activity and including standing and lifting for extended periods of time sometimes at height of up to 10 feet
FCAW/GMAW and SAW processes
12 months experience in a pipe, pressure vessel or structural welding shop
Is mindful about family, health and well-being
Requires judgment to comply with instructions, solve problems, and the ability to solve minor technical issues without guidance
Ability to resolve minor welding and fit-up issues with minimal guidance.
Uses a scissor lift when needed to access welding work at heights.
Graduate of a welding and fabrication vocational or technical training program
Uses FCAW/GMAW welding process, with or without backing, in the flat, horizontal and vertical positions, on both steel and stainless-steel materials.
Ability to follow verbal and written instructions and effectively apply to assigned work
Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding tests with the following variables:FCAW/GMAW and SAW processesSteel-steel, steel-stainless, stainless-stainless materialFlat, horizontal and vertical positionsWith or without backingSmall pipe diameter in rotated horizontal position
Ability to manage time effectively to meet strict time deadlines and production volumes

Benefits

Salary range: $31.71 USD - $34.13 USD

With nearly 1,000 people working at Taco worldwide, each with their own story, you will discover a sense of community and diverse, intelligent colleagues who help us innovate, create and explore.

Full compensation packages are based on candidate experience and certifications.

Offers tuition reimbursement, career development, and on-site training programs in our learning center
Provides competitive salaries and benefits

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

Information not given or found

Security clearance

Information not given or found

Company

Overview

1920

Year Founded

The company was established in 1920, marking its journey as a century-old innovator in hydronic flow-control systems.

It engineers pumps, valves, tanks, heat exchangers and electronic controls for efficient water-driven solutions.
Originally focused on HVAC heating and cooling, it rebranded and diversified into plumbing, agriculture and industrial markets.
With global operations spanning North America, Europe and Asia, Taco claims a strong presence across diverse sectors.
Landmark projects include high‑efficiency ECM circulators (00e Series) and smart plumbing systems delivering instant hot water.
Strategic acquisitions—like Italian pump maker Askoll—expanded its reach into European hydronics.
Its Hydroflo division supplies robust pumps for irrigation, mining and agriculture, standing out in non‑comfort markets.
A privately held, family‑owned manufacturer, it blends U.S. production with global scale and tailored engineering solutions.

Culture + Values

People First: We value every relationship. Within our team and among our customers.
Do The Right Thing: Integrity is the foundation for everything we do. So we do what is right — even when no one is watching.
Always Optimistic: We look at things with a positive eye and an open mind and always try to see the good in something first.
Authentic: We celebrate all of the nuances that make us unique. For it's our differences that make us thrive and do better when together.

Environment + Sustainability

26% Improvement

Building Performance

Achieved a 26% improvement in baseline building performance at the LEED Gold certified Innovation Development Center.

35% Green Power

Green Power Purchase

Purchased 35% green power for both the Innovation Development Center and Distribution Facility.

75% Waste Diverted

Construction Waste

75% of construction waste was diverted from landfill at the Innovation Development Center.

0% Net-Zero

Net-Zero Target

Currently, no publicly stated net-zero target date is available.

Committed to being good environmental stewards: 'obligated to respect the environment, to protect it, and help restore it in whatever way we can through the choices we make as a company.'

Inclusion & Diversity

58% Female, 42% Male

Gender Diversity

The employee population reflects a balanced gender distribution with 58% female and 42% male representation.

50% White, 32.5% Hispanic/Latino, 9.2% Black/African-American, 4.9% Asian

Ethnic Diversity

The employee population reflects a diverse ethnic composition, including significant representation from multiple communities.

Turnover <1%

Employee Retention

The company maintains a low employee turnover rate, significantly below the industry average.

Provides tuition reimbursement, career development, on-site training, and a global Manager Development Program in partnership with DDI/DiSC.
Affirms equal opportunity in hiring regardless of race, gender, sexual orientation, gender identity and expression, age, disability or veteran status.

Articles

Taco, Inc. Overview

LinkedIn - Taco, Inc.