Principal Engineer Functional Safety

Description

• Study company contractual requirements and instrumentation scope boundaries and responsible for management of change within scope of work for instrumentation department.
• Developing the SRS.
• Handle custody transfer metering skids engineering, fabrication along with Vendor interface.
• Responsible for proper delegation of work and for mentoring, guiding, and training of team members.
• Outlining testing requirements and frequencies.
• Manage instrument engineering technical interfaces with equipment and package suppliers for assigned areas to ensure compliance with technical requirements.
• Conducts Hazard & Risk Assessment, allocation of safety requirements to the SIS, functional safety requirements
• Entering test intervals in maintenance systems, and writing/updating test procedures.
• Finalization of Guidelines and specification for Package Vendor Instrument deliverables.
• Review of Quotations, preparation of Technical Questionnaire.
• Updating all SIFs.
• Represent instrument discipline in meetings, workshops and technical reviews that relate to instrument engineering.
• Guide the team to implement work processes, procedures, and quality policy in the project.
• Should have handled packages (Oil & Gas) like Flare Package, Cooling Towers, Centrifugal Pumps, Desalter Package, Fired Heaters, burner management system, Reactors, ID-FD Fans, Compressors, PSA, custody metering skids, etc.
• Preparation/checking of SIL assessment report for Methanol, Hydrogen, Ammonia, renewable fuel technologies, SIL Verification report review.
• Participation in Hazard Operability (HAZOP) reviews and Safety Integrity Level (SIL) assessment study in line with industry standards, regulatory requirements IEC61508 and IEC61511.
• Responsible for technical integrity of all Instrument Engineering Design activities deliverables for work performed by team members through project lifecycle phases and for compliance to project specific performance, quality and HSE requirements relevant to scope of work.
• Handle Machinery control system, vibration monitoring system from Bentley Nevada.
• Collect vendor data and analyze records to determine instrument failure rates, availability, failure modes identification and cost analysis for different instrument configurations.
• Modeling any new SIFs along with IL-calculations.
• Responsible to provide timely recommendations to resolve high priority issues and support by fast paced resolution of Instrument related queries.

Requirements

Mandatory Certifications

Software Skills Preferred

Experience : 18 - 25 Years

Should have experience with Functional Safety involving

Work Experience

• HAZOP-LOPA review and safety instrumented function list generation, along with risk-reduction factors required, and delivered.
• SIL Determination
• Use of Failure Modes, Effects and Diagnostic Analysis (FMEDA)
• Experience in installation, commissioning, and maintenance of Control system (Emerson Delta V DCS, ESD & FGS, Honeywell HC900 Safety PLC, Honeywell Safety Manager, ML-200 PLC, Rockwell Advance, Schneider electric Foxboro DCS), VMS (Meggitt VM 600) TFMS (Honeywell Enraf), CCTV (Honeywell HUS & Maxpro), ACS, FAP (Simplex & ESSER) and Terminal Automation system.
• Shall be a TUV Rheinland Certified Functional Safety Engineer with minimum of 5+ years of utilizing certification experience.
• IES 3
• SPI In tools
• Instrumentation and Controls Engineer with 18+ years’ experience in Oil and Gas Industry (Upstream Oil and Gas / Downstream Refinery Units)
• SPI Intools
• Use of PFDavg, Risk Reduction Factor
• Understanding and including the impact of equipment sparing, redundancy, reliability, availability, maintainability, and maintenance cost in support of Operations Excellence and Capital efficiency in planning and design phase.

Benefits

• Safety Lifecycle Management
• Smart Plant Review

Training + Development

Interview process

Visa Sponsorship

Security clearance