Turbine Mechanic (2nd Shift)

Description

• Charting of the disassembly of the blades and proper labeling.
• Measure and record the critical dimensions of the turbine components.
• Repair or rebuild hydrogen seal assemblies and rigging and shipping skid setup.
• Receive and inspect incoming turbine components, take digital pictures of shipping container, cribbing, rigging techniques, and all parts.
• All employees are entrusted, empowered, and encouraged to be responsible for attaining the highest quality and maximum value in their work product while providing a positive customer experience.
• Remove and install seals, disassemble, and assemble valves, and perform blade ring assembly procedures.
• Follow and comply with all safety and work rules and regulations.
• Perform blade setlliting and stiffener repairs technique.
• Perform proper blade straightening and repairs procedures.
• Operate the manual grinding, milling, turning, and sawing machinery as required for installation and final fitting of turbine blade seals, and valves.

Requirements

We are seeking a 2nd Shift Turbine Mechanic (4 - 10's) to work out of our Milwaukee Service Center. This position is responsible for the disassembly, assembly, and mechanical operations on a variety of steam turbine spindles, casings, and valves where methods are standardized and prescribed. Work from assembly drawings and specifications to do skilled fitting, aligning, and adjusting along with some secondary machining. Use a wide variety of precision measuring instruments and gauging devices.

The employee must be able to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision and Ability to adjust focus. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to finger, handle, or feel. The employee frequently is required to talk or hear. The employee is occasionally required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell.

• 5 years basic machining practices.
• Capable of using various types of precision measuring instruments.
• May be assigned other tasks where similar or lesser skills are required or where activities are monitored – usually short duration to meet production requirements.
• Knowledge of design and basic mechanical principles.
• Solid math skills with the ability to add, subtract, multiply, and divide numbers including decimals and fractions. Simple use of formulas, blueprints, specifications, and tables.
• Honing and lapping, gland packing, use of radio-controlled bridge cranes, blading, babbiting, radial drill press, turbine alignment, tight wire, and oil seal repair.
• Ability to work from engineering drawings and process drawings
• Pendant crane certified 5 & 10 ton and greater with basic to advanced hitching knowledge.
• Ability to properly operate overhead cranes and lift trucks.
• 10+ years mechanical background with turbine experience a plus

Benefits

Toshiba employees enjoy a comprehensive compensation and benefit package including an annual bonus, a generous 401k match, health, and wellness programs as well as generous time off.

Training + Development

Interview process

Visa Sponsorship

Security clearance