Engineering Technician III (Travel)
Akima
FAA systems: troubleshoot, repair, test, install equipment, travel.
10 days ago ago
Intermediate (4-7 years)
Full Time
Oklahoma City, OK
Field
Company Size
1,500 Employees
Service Specialisms
Engineering
Construction
Project Management
Technical Services
Consulting
Operations & Maintenance
Logistics
IT Services
Sector Specialisms
Facilities & Ground Logistics
Information Technology
Aerospace Solutions
Protective Services
Systems Engineering
Mission Support
Government Security Operations
Detention Management Operations
Role
What you would be doing
cable production
system installation
equipment testing
troubleshooting
tower maintenance
circuit repair
- Production and repair of electronic cables and wire harnesses.
- Installation of electronic and mechanical systems and components on NAS and Inter-Agency systems.
- Performing equipment adjustment, testing, and certification.
- Developing and performing equipment and component adjustment, test, and certification processes; and in installing equipment and modifications.
- Perform basic troubleshooting of electronic/electro-mechanical systems to include fault isolation, removal, and replacement of failed Line Replaceable Units, (LRU’s) required to return the system to full operational capability. Training, procedures, or guidance will be provided.
- Maintenance on the inside and outside of tower structures at heights in excess of 50 feet, but not to exceed 750 feet. Labor includes, but not limited to, installation, removal and maintenance of communication antennae, surveillance systems, safety wire, tower guy wire pull-off shackles and tower obstruction lighting systems.
- Completion of trip reports.
- Performing corrosion control and prevention.
- Structural inspection of towers and tower components at heights in excess of 50 feet, but not to exceed 750 feet.
- Prepare FAA and interagency assets for shipment to and from field site, vendor locations and/or Federal Aviation Administration Logistic Center, (FAALC).
- Circuit board testing and repair.
- Installation of equipment and components, and modifications.
- Operation of motorized forklift.
- Performing equipment performance analyses, and information collection and reporting.
- Assists junior technicians with technical tasks and may be required to provide on the job training.
- Support project package reviews and briefs management on any discrepancies.
- Keeps Crew Leads informed of assigned tasks and status.
- Support crew lead responsible for workload planning, scheduling, and leading jobs.
- Installation of electronic and mechanical systems and components.
- Meets and coordinates with internal and external customers regarding projects.
- Operation of equipment such as boom man lifts and motorized forklifts.
- Work independently to perform Corrective Maintenance, (CM’s) on FAA and interagency systems in accordance with local and FAA policy and procedures.
- Installation and maintenance of NAS Radomes.
- Preventative maintenance and replacement of tower, radome and cab glass components.
- Operation of boom man lifts.
- Assisting in producing, reviewing, revising, and interpreting technical documents; assisting in designing, fabricating, assembling, troubleshooting, and repairing electrical, electronic, and mechanical systems, subsystems, components, test fixtures, and prototypes.
- Work independently to perform Preventive Maintenance, (PM’s) on FAA and interagency systems, in accordance with local and FAA policy and procedures.
- Support briefs to front line manager and executive managers on program status.
- Attend all Training Classes as required to maintain sufficient knowledge of repair procedures for all systems. (To include all Safety related courses).
- Enters time into Data Collection and Reporting System (DCRS) daily to ensure timely billing of hours.
What you bring
associate degree
electrical
engineering technician
naci clearance
rope work
faa systems
- Rope repelling / on rope work at heights.
- NACI Clearance - ability to obtain Public Trust.
- Due to safety and operational requirements mandated by our government customer, all engineering technicians are required to successful complete a physical fitness evaluation, which includes specific weight restrictions of minimum 125lbs and maximum of 290lbs.
- Certificate of U.S. Citizenship or Naturalization.
- Estimated Monthly Travel required for this position: 70%.
- U.S. Department of Transportation (DOT) Transportation ID Card.
- U.S. Military or U.S. Military dependent’s ID Card with photograph.
- Original or certified copy of a birth certificate.
- U.S. Government Personal Identity Verification (PIV) Card.
- One Primary form of government-issued identification, selected from the following:
- Specialized knowledge of FAA systems, equipment, procedures, and operations is highly desired.
- Moderate lifting and carrying (50 lbs.), straight pushing and pulling, reaching above shoulders, use of fingers and both hands required, walking and standing, repeated bending, climbing, crawling, kneeling (use of both legs and arms), operation of crane, truck, tractor, or motor vehicle, both eyes required with depth perception and ability to distinguish basic colors and shades of colors, hearing (aid permitted).
- NAVAID antenna and component repair and overhaul.
- Tower Climbing / Work at heights in excess of 50’.
- Ability to work at heights.
- A valid driver's license is required.
- Due to the limitations of fall protection gear, the minimum weight for an applicant is 125lbs, the maximum weight is 290lbs.
- Position requires traveling, up to 70%, and may entail emergency call outs for corrective maintenance as required.
- Permanent Resident Card (Form I-551).
- Valid REAL ID-compliant driver’s license or state-issued ID card.
- Must possess TWO forms of unexpired identification to meet eligibility requirements.
- U.S. Passport or U.S. Passport Card.
- An associate degree in electrical or engineering technology and completion of formal technical training courses is required for level III.
- Voter registration card.
- Rotary joint and drive motor troubleshooting and repair.
- Practical experience in an engineering technician support position is required. This experience must include assisting in developing, reviewing, and updating engineering documentation and processes, and in troubleshooting, repairing, assembling, testing, and installing electrical, and mechanical systems and equipment.
- Social security card.
Information not given or found
Interview process
Information not given or found
Visa SponsorshipInformation not given or found
Security clearanceInformation not given or found
People also searched
Installation Technician Jobs in Oklahoma City United StatesCable Technician Jobs in Oklahoma City United StatesField Engineer Jobs in Oklahoma City United StatesSite Engineer Jobs in Oklahoma City United StatesEngineering Technician Jobs in Oklahoma City United StatesMechanical Technician Jobs in Oklahoma City United StatesConstruction Technician Jobs in Oklahoma City United StatesElectrical Technician Jobs in Oklahoma City United States
Company
Overview
- Founded with a vision to support critical sectors, providing solutions across defense, intelligence, and civil sectors.
- Serves a broad spectrum of industries, including energy, infrastructure, and water resources.
- Delivered complex projects, such as large-scale infrastructure upgrades and energy management solutions.
- Projects often involve intricate logistical coordination, requiring a deep understanding of specialized markets.
- Approach is deeply collaborative, often working alongside government agencies and other key partners.
- Noteworthy projects include managing water resource systems and optimizing energy infrastructure for municipalities.
- Focus on operational excellence makes it a go-to partner for government and private sector organizations.
- Operate with honesty, transparency, and fairness.
- Foster teamwork and value the diverse perspectives of our people.
- Dedicated to delivering creative solutions and continuous improvement.
- Strive to exceed customer expectations in all that we do.
- Consistently deliver high-quality services and strive for continuous growth and development.
Net Zero by 2050
Long-term Sustainability Goal
Achieving Net Zero emissions by 2050 reflects a commitment to combating climate change and reducing the carbon footprint.
- Committed to reducing environmental impact and fostering sustainable practices across operations.
- Supports energy efficiency initiatives and implements waste reduction practices in operations.
- Encourages environmental responsibility and sustainable practices across the supply chain.
- Committed to fostering a diverse and inclusive workforce by ensuring equal opportunities for all employees.
- Values diverse perspectives and strives to create an inclusive workplace culture.
- Has set specific goals to increase diversity at all levels of the organization.
Kablio AIIf you're someone who helps build and power the world (or dreams to), Kablio AI is your pocket-sized recruiter that gets you hired.
Copyright © 2025 Kablio