Fluid System Design Engineer - Test Rig Design (Submarines) at Rolls-Royce in Derby, England, United Kingdom | Kablio

Role

Description

control logic

p&id diagrams

flow modeling

design analysis

requirement planning

Development of operating philosophies and high-level control system logic
Creation of Pipework and Instrumentation Diagrams (P&ID), and the associated valve and equipment schedules.
Development of 1D system flow models, derivation of loss coefficients etc.
Applying standard fluid flow and thermal hydraulic theory to inform and justify design decisions around system layout, component selection and sizing. Examples include:
Generating requirements, scoping work, and planning tasks in conjunction with stakeholders.

Requirements

process safety

regulated industry

hazop

flomaster

engineering degree

process design

Sound knowledge of engineering principles, process safety, and applicable codes & standards.
Experience, where possible, in a relevant, heavily regulated industry, such as Chemical, Pharmaceutical, Energy, Water or Nuclear.
Understand of design process and design and safety assessment processes and tools e.g., HAZOP/HAZID/SWIFT/FMEAs etc.
Desirable to have experience in the use of 1D flow modelling software (specifically FloMaster).
Degree (or equivalent) in mechanical engineering, chemical engineering, or another science or engineering discipline with thermo-fluids content.
Experience of design of process plant facilities, such as oil and gas pipework systems or chemical process facilities, is desirable
Pump, valve (inc.safety relief) and heat exchanger sizing and selection.
Track record of delivering solutions against specific customer requirements to time, cost, and quality.
Experience of specifying, designing, justifying, or operating complex fluid/chemical process systems

Benefits

Information not given or found

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

Information not given or found

Security clearance

security check clearance required; rolls‑royce will support application if not held.
candidate must be a uk national or a mod‑approved dual national.

Company

Overview

£18.9 billion

Revenue

The company achieved near £18.9 billion in revenue in 2024.

£2.9 billion

Operating Profit

The company reported an operating profit of approximately £2.9 billion in 2024.

36%

Market Share

The company holds a commercial engine market share of roughly 36%. This reflects its strong position in the sector.

25 vehicles/day

Production Rate

The company's Goodwood facility produces approximately 25 ultra-luxury electric vehicles per day under a BMW licence.

Founded in the early 20th century, it began as a pioneer in aero-engine design and has grown into a global engineering powerhouse.
It develops and produces engines and power systems for commercial and military aircraft, naval vessels, submarines, and energy infrastructure.
Headquartered in London, it operates across four core segments—civil aerospace, defence, power systems and emerging markets like nuclear and modular reactors.
It supports iconic programmes—supplying wide-body commercial aircraft engines, submarine nuclear reactors, naval propulsion, and bespoke industrial power units.
Amid a major turnaround since 2023, the company secured a £9 billion UK defence reactor deal.

Culture + Values

We do the right thing – We do what’s right for our customers, our people, and society.
We aim high – We stretch our ambition, we set challenging goals, and we deliver results.
We take ownership – We take personal responsibility for our actions, performance, and results.
We act with integrity – We build trust by being honest, transparent, and ethical in everything we do.
We collaborate – We work together with respect, trust, and inclusiveness to achieve our goals.

Environment + Sustainability

Net-zero by 2050

Carbon Neutrality Goal

Aims to achieve net-zero carbon emissions by 2050.

Carbon intensity down by 25%

Carbon Intensity Reduction Target

Committed to reducing the carbon intensity of products and operations by 25% by 2030.

CO2 emissions reduced by 50%

SAF Emissions Reduction

SAF strategy targets a 50% reduction in CO2 emissions from flight by 2050.

Engaged in development of hybrid-electric and fully-electric propulsion systems to reduce environmental impact.
Focus on reducing waste and resource consumption across the entire supply chain.

Inclusion & Diversity

30% by 2030

Female Leadership Target

Aims to achieve 30% female representation in senior leadership positions.

26% workforce

Gender Representation

Women currently account for 26% of the global workforce as of 2023.

Set a goal to increase representation of ethnic minorities in senior roles.
Implemented initiatives to promote a more inclusive work environment, including mentorship programs and leadership development for underrepresented groups.

Articles

R2 Factory – digital transformation community

Rolls‑Royce Motor Cars PressClub

Rolls‑Royce at Global Space Congress – supplier info

Role

Description

control logic

p&id diagrams

flow modeling

design analysis

requirement planning

Development of operating philosophies and high-level control system logic
Creation of Pipework and Instrumentation Diagrams (P&ID), and the associated valve and equipment schedules.
Development of 1D system flow models, derivation of loss coefficients etc.
Applying standard fluid flow and thermal hydraulic theory to inform and justify design decisions around system layout, component selection and sizing. Examples include:
Generating requirements, scoping work, and planning tasks in conjunction with stakeholders.

Requirements

process safety

regulated industry

hazop

flomaster

engineering degree

process design

Sound knowledge of engineering principles, process safety, and applicable codes & standards.
Experience, where possible, in a relevant, heavily regulated industry, such as Chemical, Pharmaceutical, Energy, Water or Nuclear.
Understand of design process and design and safety assessment processes and tools e.g., HAZOP/HAZID/SWIFT/FMEAs etc.
Desirable to have experience in the use of 1D flow modelling software (specifically FloMaster).
Degree (or equivalent) in mechanical engineering, chemical engineering, or another science or engineering discipline with thermo-fluids content.
Experience of design of process plant facilities, such as oil and gas pipework systems or chemical process facilities, is desirable
Pump, valve (inc.safety relief) and heat exchanger sizing and selection.
Track record of delivering solutions against specific customer requirements to time, cost, and quality.
Experience of specifying, designing, justifying, or operating complex fluid/chemical process systems

Benefits

Information not given or found

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

Information not given or found

Security clearance

security check clearance required; rolls‑royce will support application if not held.
candidate must be a uk national or a mod‑approved dual national.

Company

Overview

£18.9 billion

Revenue

The company achieved near £18.9 billion in revenue in 2024.

£2.9 billion

Operating Profit

The company reported an operating profit of approximately £2.9 billion in 2024.

36%

Market Share

The company holds a commercial engine market share of roughly 36%. This reflects its strong position in the sector.

25 vehicles/day

Production Rate

The company's Goodwood facility produces approximately 25 ultra-luxury electric vehicles per day under a BMW licence.

Founded in the early 20th century, it began as a pioneer in aero-engine design and has grown into a global engineering powerhouse.
It develops and produces engines and power systems for commercial and military aircraft, naval vessels, submarines, and energy infrastructure.
Headquartered in London, it operates across four core segments—civil aerospace, defence, power systems and emerging markets like nuclear and modular reactors.
It supports iconic programmes—supplying wide-body commercial aircraft engines, submarine nuclear reactors, naval propulsion, and bespoke industrial power units.
Amid a major turnaround since 2023, the company secured a £9 billion UK defence reactor deal.

Culture + Values

We do the right thing – We do what’s right for our customers, our people, and society.
We aim high – We stretch our ambition, we set challenging goals, and we deliver results.
We take ownership – We take personal responsibility for our actions, performance, and results.
We act with integrity – We build trust by being honest, transparent, and ethical in everything we do.
We collaborate – We work together with respect, trust, and inclusiveness to achieve our goals.

Environment + Sustainability

Net-zero by 2050

Carbon Neutrality Goal

Aims to achieve net-zero carbon emissions by 2050.

Carbon intensity down by 25%

Carbon Intensity Reduction Target

Committed to reducing the carbon intensity of products and operations by 25% by 2030.

CO2 emissions reduced by 50%

SAF Emissions Reduction

SAF strategy targets a 50% reduction in CO2 emissions from flight by 2050.

Engaged in development of hybrid-electric and fully-electric propulsion systems to reduce environmental impact.
Focus on reducing waste and resource consumption across the entire supply chain.

Inclusion & Diversity

30% by 2030

Female Leadership Target

Aims to achieve 30% female representation in senior leadership positions.

26% workforce

Gender Representation

Women currently account for 26% of the global workforce as of 2023.

Set a goal to increase representation of ethnic minorities in senior roles.
Implemented initiatives to promote a more inclusive work environment, including mentorship programs and leadership development for underrepresented groups.

Articles

R2 Factory – digital transformation community

Rolls‑Royce Motor Cars PressClub

Rolls‑Royce at Global Space Congress – supplier info