QC TESTING ELECTRICIAN

Description

• Ensure safety measures are being implemented with regard to meters and PPE being used i.e., Arc Flash protection, ATEX, incl. associated signage / labelling.
• Set discrimination settings into protective devices (as provided by the Design Consultant).
• Complete Test Record Sheets as per International Standards i.e., IEC, EN, IS, etc.
• Assist close-out of project issues / investigations / queries.
• Carry out Inspection & Testing of Final Sub-Circuits (including functional checks).
• Carry out Pre-Test Inspections (walk-down the field installation of each system term to term) on site and compile defect reports on compliance with national electrical regulations.
• Carry out testing of Low Voltage (LV) installations as required by national governing bodies i.e., Safe Electric, issue report and snag list.
• Update cable schedules, for changes made.
• Create Distribution Board / Panel Charts schedules for inclusion in O&M Manual.
• Verification of Redlined Drawings for the LV Installation that is being Tested.
• Implement and manage Lock Out-Tag Out (LOTO) and Control of Hazardous Energy (COHE) on projects where they are the AP (Appointed Person).
• Carry out periodic inspections and surveys of installations.
• Compilation of reports and issue ‘As Built’ Test Certificates.
• Issues Final Safe Electric, ATEX and Commissioning Certification for project.
• Notify Project Manager and QC lead of any non-conformances or hazards on site.
• Manage and Implement Electrical Safe System of Work on site (if acting as AP role)
• Carry out testing of Control circuits.
• Carry out Inspection & Testing of Main and Sub-Main Distribution Boards and Transformer offloading cabling.
• Maintain LOTO (Lock-Out Tag-Out) measures on projects.
• Carry out Earthing & Bonding Testing.

Requirements

• Adhere to Low Voltage (LV) Switchgear switching protocols – ACB’s, MCCB’s etc.
• Good Knowledge of I&C installations.
• Electrical Trade Background and/or a Third Level qualification in either Electrical or Building Services Engineering preferred.
• Ability to read detailed electrical drawings and cable schedules.
• CompEx E01-06 qualified for ATEX environments (preferable).
• Ability to fault find/diagnose issues on installations while testing.
• Authorised Person (AP) competent and trained (preferable).
• Data Centre experience / knowledge
• LOTO and COHE trained.
• Technical Knowledge and experience of Low Voltage systems and regulatory requirements
• City & Guilds 2407 – Electrical Testing and Verification of Electrical Installations (Ireland) trained and qualified.

Benefits

Training + Development

Interview process

Visa Sponsorship

Security clearance