Material Handler Night Shift

Description

• Sit only during the break and lunch periods.
• Locate beams, tubes, angle, channel, bar grating, pipe, plate, or rounds according to the layout shown on yard map, cut lists and shop drawings.
• Lift weights up to 30 pounds FREQUENTLY from floor to head, which includes the various tools and blocks utilized in the process of performing the usual work duties during the 8 to 12 hour work shift.
• Carry weights noted above distances ranging from a few feet to 60 feet.
• Climb OCCASIONALLY to FREQUENTLY up and down steps, ladders, onto material, or onto conveyors.
• Operate overhead cranes, forklifts, jib cranes, gantry cranes, conveyors, and transfers in order to move materials.
• Attend all meetings as required by management.
• Crawl OCCASIONALLY up to 5 feet to access tools, materials, etc.
• Stoop or crouch OCCASIONALLY while performing the regular job duties. The position will be held continuously for a few seconds to 15 minutes, depending upon the job.
• Identify steel shapes, sizes, and mill tolerances.
• Stand FREQUENTLY over the course of the 8 to 12 hour work shift.
• Reach overhead OCCASIONALLY to FREQUENTLY to guide material attached to the cranes, to attach the chains from the crane to the material, to locate blocks, or to saw blocks.
• Wear all required Personal Protective Equipment. PPE includes steel-toe safety shoes, hearing protection, safety glasses, gloves, and hard hats.
• Push and pull material attached to an overhead crane or jib crane OCCASIONALLY to FREQUENTLY to properly guide into place. Force varies up to 35 pounds.
• Pull hand over hand OCCASIONALLY to FREQUENTLY to pull chain through material. Force varies up to 70 pounds.
• Kneel in the commission of job duties OCCASIONALLY, depending upon the job.
• Reach forward FREQUENTLY to perform job duties or to retrieve tools. The employee will OCCASIONALLY be required to reach to full forward extension.
• Locate material as trained and instructed.
• Load/unload trailers, railcars, and saw horses.

Requirements

• Hear sufficiently to be aware of safety issues
• Consistently and reliably work scheduled hours at assigned locations.
• Lift weights up to 70 pounds OCCASIONALLY from knee to waist, which includes the various tools utilized in the process of performing the usual work duties during the 8 to 12 hour work shift.
• Exposure to solvents, greases, oils, and coolants OCCASIONALLY.
• Visual ability to read and interpret shop drawings. Safety glasses are required in the shop area.
• Exposure to fumes, odors and dusts in the shop area OCCASIONALLY.
• Exposure to heat, cold, wet and humid conditions in the shop area OCCASIONALLY.
• Walk CONTINOUSLY over the course of the 8 to 12 hour work shift.
• Six months of experience in a steel manufacturing environment is preferred.

Benefits

Training + Development

Interview process

Visa Sponsorship

Security clearance