Instrument Technician I

Description

• Perform preventative maintenance or calibration of equipment or systems.
• Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools.
• Installs, repairs, maintains, and calibrates electronic equipment, controls, and measuring devices.
• Will be required to wear personal protective equipment (PPE) including but not limiting to hard hat, safety glasses, gloves, fall arrest harness, face shield, ear plugs, and goggles.
• Completes report on tests, repairs, and installations for all work requested to complete.
• Read blueprints, wiring diagrams, schematics, isometric drawings, engineering instructions, and manufacture instructions
• Tests and analyze electronic and measuring equipment for accuracy and functionality.

Requirements

• 1 - 50' or 100' Tape Measure
• Must have tools (see tool list below).
• Must be able to check performance using testing and measuring. Instruments and make necessary adjustments.
• Must have knowledge of electrical theory and how to apply it to connecting, wiring, and calibrating electronic devices.
• Must have reliable transportation to and from work.
• 1 - Wire Strippers
• Must be capable of working outside in the elements including heat, cold, rain, snow and wind
• 1 - Tape Measure 12' to 25'
• Have formal education or vocational training.
• Must be able to work with precision instruments and tools.
• 1 - Metal Tool Box with Lock
• Must be willing to follow all company and project work policies and procedures.
• 1 - Plumb Bob
• 1 - Kevlar Gloves
• Experience in instrumentation on a combined-cycle power plant.
• Current, ROF’ed, or Former Employee.
• May be required to lift, carry and move up to 50lbs.
• 1 - Cold Chisel
• 1 - Hammer (Ball Peen or Claw)
• 1 - Torpedo Level
• Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting.
• 1 - Combination Wrenches 3/8",7/8"
• Required to have all journeymen tools and have experience with associated power tools.
• 1 - Protractor Level
• 1 - Center Punch
• Must have 4+ years’ experience in instrumentation
• 1- Electronic Measuring Probes
• 1 - Screwdrivers 6" to 10" (Slotted & Phillips)
• 1 - Tubing Cutter Set
• Must be willing to assist in any additional qualified duties assigned.
• Will as needed work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300’ utilizing proper fall protection.
• 1 - Pocket Knife
• Must be able to read and interpret drawings, blueprints and P & IDs, isometric drawings, and other required documentation.
• Must be willing to follow all company and project policies, rules, and guidelines.
• 1- Soldering tool
• 1 - Hacksaw
• Must have experience in calibration both performing and working with calibration laboratories.
• Must be able to work at heights and be able to climb ladders and stairways as well as work on elevated platforms
• 1 - 9" Klein Side Cutters
• 1 - 8" Diagonal Pliers
• 1 - Tubing Benders (1/4", 3/8", 1/2")
• Must be able to work with low and high pressure tubing/piping systems.
• 1 - Pair of Leather Gloves
• 1 - 8" Needle Nose Pliers
• 2 - Crescent Wrenches (8" & 12")
• 1 - Ratchet Crimper
• 1 - Nut Driver Set 3/8", 7/16", 1/2", 9/16"
• 1 – Rain Coat / Rubber boots
• Must have knowledge of working with gauges and other measurement devices.
• 1 - Flashlight
• Must have 4+ years’ experience in instrumentation or illustrate comparable level of knowledge.
• Must be able to work on low and high pressure tubing/piping systems.
• 1- Multi-meter
• Must be able to read blue prints.
• 1 - Channel Locks

Benefits

• 1 - Allen Wrench Set
• 1 - Tool Pouch with Belt

Training + Development

Interview process

Visa Sponsorship

Security clearance