Welder 2

Description

• Will work at slight heights, climb ladders and stairways, and may occasionally work off of platforms using the appropriate fall protection requirements.
• Layout, position, aligns, cut, assemble, and fit metal components together in various body positions and in various places.
• Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools.
• Weld metal materials to piping systems equipment using the appropriate welding procedure for the various equipment and metal types involved.
• Identify all safety risks and requirements.
• Bolts, clamps, and tack-welds parts to secure in position for welding.
• Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and leather work boots.
• Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc, or arc gas welding equipment.
• Identify all equipment for job and process.
• Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques.

Requirements

• Experience working as an Industrial Pipe Fitter.
• Current Zachry or Zachry ROF’ed employee.
• Must be able to meet all physical requirements.
• 1 - Metal Tool Box with Lock
• 1 – Rain Coat
• Will talk and hear to communicate.
• Must have all the tools listed below upon start date.
• Must be able to work in weathering conditions including heat conditions while wearing appropriate PPE.
• 1 - Pair of Leathers (overhead welding)
• 2 - Crescent Wrench 12" & 15"
• Former experience working with Zachry Industrial, Inc.
• Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting.
• Must pass 2" Extra heavy carbon steel weld test 6G position. Will have 2 months to pass the restricted version of the weld test**
• May be required to lift, carry and move up to 50lbs.
• 1 - Pair of Welding Gloves
• Must have current applicable welding certification with Zachry or be able to successfully pass a weld test.
• 1 - Chipping Hammer
• 1 - Welding Hood
• 1 - Torpedo Level1 - Combination Square
• Previous experience in this position with Zachry Industrial, Inc.
• 1 - 25' Tape1 - File1 - 4-12lb Beater
• Must be able to Stick and Tig weld on Pipe.
• Must have the ability to weld in 2g, 4g, and 6g conditions.
• 1 - Tig Rig (combo welder's only)
• Current Zachry Certification.
• Must have 4+ years welding experience.
• Former experience working an a Combined-Cycle power plant construction project.
• 1 – Stinger
• 1 – Rubber boots
• 1 - Pair of Klein Pliers or equal

Benefits

Training + Development

Interview process

Visa Sponsorship

Security clearance