Senior Electrical Engineer at Worley in IND-KR-Bangalore | Kablio

Role

Description

safety management

oh&s compliance

procurement support

3d modelling

engineering liaison

quality assurance

Safety – Responsible for personal safety and safe working practices for the Project.
Understand and follow OH&S procedures and guidelines.
Procurement Support by developing Material Requisitions (MR), Technical Query (TQ), Technical BidEvaluation (TBE), Vendor document & drawing reviews (VDRN) etc.
Guide, review for the development of 3D modelling activities (30%,60% & 90% design).
Liaison with other engineering disciplines on technical issues and provide solutions.
Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the Project.
Check compliance with Quality Assurance, Safety and Environment goals.

Requirements

etap

scada

iec standards

switchyard

lead engineer

hazardous area

Able to Lead independently HV, MV and LV Electrical engineering design scope in Oil and Gas, Refinery, LNG, Petrochemical Industry, Greenfield and Brownfield projects with minimum guidance from DM / PM.
Handson experience in Electrical equipment selection for the Hazardous area and preparation of Hazardous area layouts.
Handson experience of Power System Studies using ETAP / SKM and experience in SPEL are preferable.
Experience in design of special packages such as Electrical Heat tracing design, Lightning Protection System Design and develop layouts.
Experience in generating Key Single Line Diagram and Detailed Single Line Diagrams, Metering & Protection Diagrams, Design Basis, Specifications, Data sheets, Electrical Load List, Sizing Calculation of all Electrical Equipment.
Able to check engineering and design deliverables independently and prepare workhour estimate.
Experience in Electrical calculations viz., equipment sizing, cable sizing, lighting calculations.
Handson experience in design of outdoor switchyards (AIS / GIS) and it’s layouts upto 66kV, 132kV, 220kV etc is an added advantage.
Handson experience in Design of Energy management system (EMS) & Power management System (PMS), SCADA, Loadshedding System etc are an added advantage.Must have working experience with IEC, NEC, ANSI/IEEE, ANZ Electrical standards as minimum.Must have working experience as Lead with Clients viz., ADNOC, NOC, Qatar Energy, Qatargas, Saudi Aramco, SHELL, Chevron etc.Able to check engineering and design deliverables independently and prepare workhour estimate.Guide, review for the development of 3D modelling activities (30%,60% & 90% design).Check compliance with Quality Assurance, Safety and Environment goals.Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the Project.Safety – Responsible for personal safety and safe working practices for the Project.Understand and follow OH&S procedures and guidelines.Liaison with other engineering disciplines on technical issues and provide solutions.
Must have working experience with IEC, NEC, ANSI/IEEE, ANZ Electrical standards as minimum.
Must have working experience as Lead with Clients viz., ADNOC, NOC, Qatar Energy, Qatargas, Saudi Aramco, SHELL, Chevron etc.
Handson experience in handling layout engineering such as Power cable tray routing, Earthing, lighting layouts, Substation Equipment Layouts etc.

Benefits

Information not given or found

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

Information not given or found

Security clearance

Information not given or found

Company

Overview

1971-founded

Year Established

Company was founded in 1971 as an Australian engineering consultancy.

2002-listed

Public Listing Year

Listed on the ASX, expanding its global presence.

1B+ AUD

Annual Revenue

Generates over A$11.6 billion in annual revenue.

45 Countries

Global Presence

Operates across 45 countries worldwide.

Expanding globally through steady growth and acquisition.
Broadened reach in Canada, China, the U.S., and beyond.
Merged with Parsons E&C in 2004.
Delivers full-lifecycle services from concept to decommissioning.
Partners on major global projects across energy, chemicals, resources, and power.
Innovates in low-carbon energy and carbon capture.
Large-scale direct air capture engineering in the U.S.
Unified subsidiaries under single identity in 2023, reinforcing integrated engineering model.

Culture + Values

Safety: We prioritize the safety and well-being of our people and communities.
Integrity: We act with honesty, transparency, and responsibility.
Innovation: We foster a culture of creativity, curiosity, and continuous improvement.
Collaboration: We work together with our clients, partners, and each other to achieve success.
Sustainability: We create lasting value through responsible actions for the environment and society.

Environment + Sustainability

2050

Net-Zero Target

Commitment to achieving net-zero emissions by a specific year.

Committed to reducing operational carbon footprint and aiding clients in transitioning to net-zero.
Committed to the sustainable delivery of energy, chemicals, and resources projects.
Integrating sustainability into core services with renewable energy and green technologies.

Inclusion & Diversity

30% by 2025

Target Female Leadership

Aim to achieve 30% female representation in leadership roles by 2025.

23% in 2022

Female Leadership Global

Currently, 23% of global leadership positions are held by women.

Values a diverse and inclusive workplace, with a focus on attracting, retaining, and developing diverse talent.

Articles

Worley (company) – Wikipedia

Specialist and technology solutions – Worley

Our services and technology – Worley

Role

Description

safety management

oh&s compliance

procurement support

3d modelling

engineering liaison

quality assurance

Safety – Responsible for personal safety and safe working practices for the Project.
Understand and follow OH&S procedures and guidelines.
Procurement Support by developing Material Requisitions (MR), Technical Query (TQ), Technical BidEvaluation (TBE), Vendor document & drawing reviews (VDRN) etc.
Guide, review for the development of 3D modelling activities (30%,60% & 90% design).
Liaison with other engineering disciplines on technical issues and provide solutions.
Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the Project.
Check compliance with Quality Assurance, Safety and Environment goals.

Requirements

etap

scada

iec standards

switchyard

lead engineer

hazardous area

Able to Lead independently HV, MV and LV Electrical engineering design scope in Oil and Gas, Refinery, LNG, Petrochemical Industry, Greenfield and Brownfield projects with minimum guidance from DM / PM.
Handson experience in Electrical equipment selection for the Hazardous area and preparation of Hazardous area layouts.
Handson experience of Power System Studies using ETAP / SKM and experience in SPEL are preferable.
Experience in design of special packages such as Electrical Heat tracing design, Lightning Protection System Design and develop layouts.
Experience in generating Key Single Line Diagram and Detailed Single Line Diagrams, Metering & Protection Diagrams, Design Basis, Specifications, Data sheets, Electrical Load List, Sizing Calculation of all Electrical Equipment.
Able to check engineering and design deliverables independently and prepare workhour estimate.
Experience in Electrical calculations viz., equipment sizing, cable sizing, lighting calculations.
Handson experience in design of outdoor switchyards (AIS / GIS) and it’s layouts upto 66kV, 132kV, 220kV etc is an added advantage.
Handson experience in Design of Energy management system (EMS) & Power management System (PMS), SCADA, Loadshedding System etc are an added advantage.Must have working experience with IEC, NEC, ANSI/IEEE, ANZ Electrical standards as minimum.Must have working experience as Lead with Clients viz., ADNOC, NOC, Qatar Energy, Qatargas, Saudi Aramco, SHELL, Chevron etc.Able to check engineering and design deliverables independently and prepare workhour estimate.Guide, review for the development of 3D modelling activities (30%,60% & 90% design).Check compliance with Quality Assurance, Safety and Environment goals.Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the Project.Safety – Responsible for personal safety and safe working practices for the Project.Understand and follow OH&S procedures and guidelines.Liaison with other engineering disciplines on technical issues and provide solutions.
Must have working experience with IEC, NEC, ANSI/IEEE, ANZ Electrical standards as minimum.
Must have working experience as Lead with Clients viz., ADNOC, NOC, Qatar Energy, Qatargas, Saudi Aramco, SHELL, Chevron etc.
Handson experience in handling layout engineering such as Power cable tray routing, Earthing, lighting layouts, Substation Equipment Layouts etc.

Benefits

Information not given or found

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

Information not given or found

Security clearance

Information not given or found

Company

Overview

1971-founded

Year Established

Company was founded in 1971 as an Australian engineering consultancy.

2002-listed

Public Listing Year

Listed on the ASX, expanding its global presence.

1B+ AUD

Annual Revenue

Generates over A$11.6 billion in annual revenue.

45 Countries

Global Presence

Operates across 45 countries worldwide.

Expanding globally through steady growth and acquisition.
Broadened reach in Canada, China, the U.S., and beyond.
Merged with Parsons E&C in 2004.
Delivers full-lifecycle services from concept to decommissioning.
Partners on major global projects across energy, chemicals, resources, and power.
Innovates in low-carbon energy and carbon capture.
Large-scale direct air capture engineering in the U.S.
Unified subsidiaries under single identity in 2023, reinforcing integrated engineering model.

Culture + Values

Safety: We prioritize the safety and well-being of our people and communities.
Integrity: We act with honesty, transparency, and responsibility.
Innovation: We foster a culture of creativity, curiosity, and continuous improvement.
Collaboration: We work together with our clients, partners, and each other to achieve success.
Sustainability: We create lasting value through responsible actions for the environment and society.

Environment + Sustainability

2050

Net-Zero Target

Commitment to achieving net-zero emissions by a specific year.

Committed to reducing operational carbon footprint and aiding clients in transitioning to net-zero.
Committed to the sustainable delivery of energy, chemicals, and resources projects.
Integrating sustainability into core services with renewable energy and green technologies.

Inclusion & Diversity

30% by 2025

Target Female Leadership

Aim to achieve 30% female representation in leadership roles by 2025.

23% in 2022

Female Leadership Global

Currently, 23% of global leadership positions are held by women.

Values a diverse and inclusive workplace, with a focus on attracting, retaining, and developing diverse talent.

Articles

Worley (company) – Wikipedia

Specialist and technology solutions – Worley

Our services and technology – Worley