Commercial Electrician

Description

• Direct the work of Electrician Helpers and Apprentices as assigned by Superintendent or their designated person.
• Responsible for coordinating the materials, tools and equipment necessary to complete any assigned task.
• Operate company truck with manual and automatic transmission.
• Follow construction drawings and other documents to ensure that concealed wiring is installed before completion of wall, ceiling, and flooring finishes are installed.
• Repetitive use of arms, hands, and fingers. Completing overhead work for full day assignments.
• Climb ladders (all types).
• Read and interpret maps, instructional manuals, work site directions, and written instructions.
• Measure, cut, bend, thread, ream, and install conduit, using appropriate tools such as hacksaw, band saw, pipe threader and conduit bender.
• Accurately install conduit, wire, pre-fab assemblies, panel-boards, light fixtures, devices, and other equipment per layout by the Superintendent or designated person.
• Complete all required documentation.
• Positively identify colors of wire and other items as required.
• Coordinate installations with other construction trades.
• Perform work at various heights, up to 90 feet from ladders, scaffolds, aerial work platforms, cat walks and other safe work areas.
• Operate two handed tools as required. Cable cutters, hammer drills, compression tools, etc.
• Pull and terminate branch and feeder conductors.
• Utilize test equipment to test voltage, amperage, and continuity of circuit wiring to ensure compatibility and safety of components.
• Prevent excessive waste of labor and materials by performing high quality installations, consistent with the designed layout, without requiring rework.
• Must wear all personal protective equipment as required
• Terminate wiring to light fixtures, motors, panels, devices, and other electrical equipment, using hand tools and power tools.
• Bend conduit using hand benders.

Requirements

• Education: High School Graduate or GED.
• Comprehension of construction drawings, schematics and specifications.
• Employee’s personal weight with tools cannot exceed the rated weight capacity of ladders used.
• Ability to trouble-shoot and perform repairs on faulty circuits, equipment or systems.
• Must hear and see well (either natural or with correction).
• Must utilize reason and logic to perform mathematical operations quickly and accurately.
• Job requires employee to have required personal tools with him at all times (waist tool belt as worn weighs approximately 30 lbs.).
• Must be able to make transition from employee parking area or street into construction work areas and to gain access to all levels of the building, even if the only means of access is by O.S.H.A. approved site construction ladder or stairs still under construction but acceptable for use.
• Must be able to safely operate construction equipment (trencher, forklift, aerial work platforms, etc.).
• Capable of digging trenches, using of hand tools or power equipment.
• Experience: Minimum of 6-years electrical experience preferred.
• Must be able to regularly work 40 hours per week plus overtime as required. Night shifts, weekends, and out-of-town work may be required.
• Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead.
• Must be able to utilize construction site sanitary facilities (Porta-Johns).
• Able to lift objects weighing up to 50 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds.
• Certifications: Applicable federal, state, and local certifications as required by job conditions or by the company.
• Must be able to secure tools and materials from storage areas to complete assigned tasks.
• Must be able to install electrical work in accordance with Ace Electric Standards while adhering to project plans and specifications.
• Tolerant to prolonged standing and movement on foot.
• Job requires working in all weather elements; heat, cold, rain, or snow, depending on job location and time of year.
• Must possess a complete understanding of construction drawings and details, and be able to visualize the 3-dimensional structure represented.
• Work in restricted or confined areas such as switch gear-rooms, manholes, utility tunnels and crawl spaces.
• Work from all types of ladders and be able to transport/relocate ladders unassisted.
• OSHA 10 - Construction
• Must have the ability to safely use required power tools.
• Comprehend and practice safe work procedures as outlined in Company Safety Handbook.
• Must adhere to Ace Electric’s Safety Program.
• License: Valid state driver's license as required by job conditions or by the company.

Benefits

Training + Development

Interview process

Visa Sponsorship

Security clearance