Manufacturing Technician I- Aftermarket - 1st Shift at Eaton in Fayetteville, NC | USD16-16 | Kablio

Role

Description

unit installation

bus assembly

material requisition

wiring assembly

cable harnessing

blueprint reading

Install units, pan assemblies and cover up steel, meters, kirk keys, pull boxes, reactors, relays, fuses, MTB assemblies, panel boards, space heaters, transformers, etc. by mounting / bolting into place. Assemble and install bus work such as lug adapters, cross over bus, splices, etc.
Utilize manufacturing information sheets, determine necessary parts, write requisitions, and obtain materials from stock areas.
Make adjustments to insure correct alignment and clearances.
Assemble and wire control devices, cutting wires to length.
Read shop orders and drawings to determine assembly procedures such as component types and configuration, mounting locations and clearances required.
Assemble and fit parts and components to form sub-assemblies, or completed assemblies.
Make pre-bent cable unit, MTB and control panel harnesses using pre-cable boards, control panels and hand crimp lugs if necessary. Cut, install and connect wire and/or cable in units where circuitry requires additional relays, timers, fuses, etc. Cut, form and connect control wire, power wire and cable, point to point on units, relay panels, control panels, and space heaters
Work from oral or written instructions from supervision and/or prints, inspection reports, manufacturing information sheets, and standard or near standard wiring diagrams.

Requirements

high school

manufacturing

production

electrical

control circuits

Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
Must have a High School Diploma or equivalent from an accredited institution.
Manufacturing or production experience preferred
A basic understanding of electrical / electronic concepts and ability to read and understand standard electrical control circuits

Benefits

No relocation benefit is offered for this position. Only candidates residing within the immediate area (50 miles) will be considered for this position

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

no visa sponsorship or immigration support will be provided.

Security clearance

Information not given or found

Company

Overview

Over 100 years

Years in operation

The company has been operational for over a century, demonstrating its long-standing presence in the industry.

Over 175 countries

Countries Operated

Eaton operates its business across 175 countries, showcasing its global reach and influence.

global leader in power management, providing energy-efficient solutions for managing electrical, hydraulic, and mechanical power.
products and services span across industrial, commercial, residential, and infrastructure markets.
innovative solutions in energy storage, electrical distribution, and industrial automation.
instrumental in advancing technologies for utilities, transportation, and energy management.
recent standout projects include large-scale energy management systems for smart cities and utilities.
systems are crucial for sectors ranging from renewable energy to water resources management.
history of growth through acquisitions, continuously expanding global footprint and product offerings.

Culture + Values

Develop employees by helping them succeed not just at work, but in life as well
Delight customers by understanding their challenges and delivering real solutions proactively
Deliver for shareholders by doing what's right
Support communities by offering time and talent to meet social and economic needs
We are ethical
We are passionate
We are accountable
We are efficient
We are transparent
We learn
Doing Business Right reflects unwavering commitment to highest ethical practices and standards of behavior
Our brand promise: we make what matters work

Environment + Sustainability

31% GHG Reduction

Operational Emissions Reduced

The company has reduced its operational greenhouse gas emissions by 31% since 2018, amounting to 302,845 metric tons of CO2 equivalents.

Carbon Neutral by 2030

Commitment to Carbon Neutrality

The company aims to achieve carbon-neutral operations by 2030, focusing on reducing carbon emissions across all operational activities.

58M Metric Tons (Scope 3)

Scope 3 Emissions in 2023

In 2023, the company reported Scope 3 greenhouse gas emissions of 58,449,862 metric tons of CO2 equivalents, reflecting emissions from the entire value chain.

$3B Invested

Sustainable R&D Funding

The company has committed over $3 billion to research and development for sustainable solutions, highlighting its investment in eco-friendly innovations.

Aiming to reduce Scope 1 and Scope 2 GHG emissions by 50% by 2030 compared to 2018 levels.
Targeting a 15% reduction in Scope 3 emissions by 2030 from 2018 levels.
Achieving zero-waste-to-landfill certification for 79% of manufacturing sites, up from 75% in 2022, with a 2030 target of 100%.
Certifying 16% of manufacturing sites as zero-water-discharge, surpassing the 2030 target of 10% for water-stressed sites.
Independent verification of Scope 1 and Scope 2 GHG data with reasonable assurance and Scope 3 data with limited assurance.
Deploying clean-energy projects such as solar microgrids, PV installations, and carports, reducing over 20,000 metric tons of CO2 equivalents annually.

Inclusion & Diversity

28% Women

Representation in Salaried Roles

Women make up nearly 28% of salaried positions, striving toward a 2030 goal of 40%.

24% Minorities

U.S. Minority Representation

U.S. minorities comprise over 24% of salaried positions, aiming for 34% by 2030.

54% Leadership

Global Leadership Team Composition

Over half of the global leadership team are U.S. minorities.

2/3 Board

Board Member Diversity

Two-thirds of Board members identify as women or U.S. minorities.

10K Members

Inclusion Resource Groups

Eight Inclusion Eaton Resource Groups (iERGs) serve over 10,500 members globally.

100% Equality

Disability Equality Index

Received a perfect score of 100 on the Disability Equality Index for three consecutive years.

100% Equality

HRC Corporate Equality Index

Achieved a perfect score of 100% on the HRC Corporate Equality Index for eight consecutive years.

Company-wide pay equity assurance processes are in place for U.S. minority and global gender pay equity.
Eight Inclusion Eaton Resource Groups (iERGs) are present in 60 countries.
Awarded as one of the Best Companies for Women in India by Avtar & Seramount.
Received multiple global inclusion awards for commitment to diversity and inclusion.

Articles

Eaton’s Electrical Engineering Services & Systems

Turnkey electrical solutions

Transmission and distribution automation solutions

Role

Description

unit installation

bus assembly

material requisition

wiring assembly

cable harnessing

blueprint reading

Install units, pan assemblies and cover up steel, meters, kirk keys, pull boxes, reactors, relays, fuses, MTB assemblies, panel boards, space heaters, transformers, etc. by mounting / bolting into place. Assemble and install bus work such as lug adapters, cross over bus, splices, etc.
Utilize manufacturing information sheets, determine necessary parts, write requisitions, and obtain materials from stock areas.
Make adjustments to insure correct alignment and clearances.
Assemble and wire control devices, cutting wires to length.
Read shop orders and drawings to determine assembly procedures such as component types and configuration, mounting locations and clearances required.
Assemble and fit parts and components to form sub-assemblies, or completed assemblies.
Make pre-bent cable unit, MTB and control panel harnesses using pre-cable boards, control panels and hand crimp lugs if necessary. Cut, install and connect wire and/or cable in units where circuitry requires additional relays, timers, fuses, etc. Cut, form and connect control wire, power wire and cable, point to point on units, relay panels, control panels, and space heaters
Work from oral or written instructions from supervision and/or prints, inspection reports, manufacturing information sheets, and standard or near standard wiring diagrams.

Requirements

high school

manufacturing

production

electrical

control circuits

Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
Must have a High School Diploma or equivalent from an accredited institution.
Manufacturing or production experience preferred
A basic understanding of electrical / electronic concepts and ability to read and understand standard electrical control circuits

Benefits

No relocation benefit is offered for this position. Only candidates residing within the immediate area (50 miles) will be considered for this position

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

no visa sponsorship or immigration support will be provided.

Security clearance

Information not given or found

Company

Overview

Over 100 years

Years in operation

The company has been operational for over a century, demonstrating its long-standing presence in the industry.

Over 175 countries

Countries Operated

Eaton operates its business across 175 countries, showcasing its global reach and influence.

global leader in power management, providing energy-efficient solutions for managing electrical, hydraulic, and mechanical power.
products and services span across industrial, commercial, residential, and infrastructure markets.
innovative solutions in energy storage, electrical distribution, and industrial automation.
instrumental in advancing technologies for utilities, transportation, and energy management.
recent standout projects include large-scale energy management systems for smart cities and utilities.
systems are crucial for sectors ranging from renewable energy to water resources management.
history of growth through acquisitions, continuously expanding global footprint and product offerings.

Culture + Values

Develop employees by helping them succeed not just at work, but in life as well
Delight customers by understanding their challenges and delivering real solutions proactively
Deliver for shareholders by doing what's right
Support communities by offering time and talent to meet social and economic needs
We are ethical
We are passionate
We are accountable
We are efficient
We are transparent
We learn
Doing Business Right reflects unwavering commitment to highest ethical practices and standards of behavior
Our brand promise: we make what matters work

Environment + Sustainability

31% GHG Reduction

Operational Emissions Reduced

The company has reduced its operational greenhouse gas emissions by 31% since 2018, amounting to 302,845 metric tons of CO2 equivalents.

Carbon Neutral by 2030

Commitment to Carbon Neutrality

The company aims to achieve carbon-neutral operations by 2030, focusing on reducing carbon emissions across all operational activities.

58M Metric Tons (Scope 3)

Scope 3 Emissions in 2023

In 2023, the company reported Scope 3 greenhouse gas emissions of 58,449,862 metric tons of CO2 equivalents, reflecting emissions from the entire value chain.

$3B Invested

Sustainable R&D Funding

The company has committed over $3 billion to research and development for sustainable solutions, highlighting its investment in eco-friendly innovations.

Aiming to reduce Scope 1 and Scope 2 GHG emissions by 50% by 2030 compared to 2018 levels.
Targeting a 15% reduction in Scope 3 emissions by 2030 from 2018 levels.
Achieving zero-waste-to-landfill certification for 79% of manufacturing sites, up from 75% in 2022, with a 2030 target of 100%.
Certifying 16% of manufacturing sites as zero-water-discharge, surpassing the 2030 target of 10% for water-stressed sites.
Independent verification of Scope 1 and Scope 2 GHG data with reasonable assurance and Scope 3 data with limited assurance.
Deploying clean-energy projects such as solar microgrids, PV installations, and carports, reducing over 20,000 metric tons of CO2 equivalents annually.

Inclusion & Diversity

28% Women

Representation in Salaried Roles

Women make up nearly 28% of salaried positions, striving toward a 2030 goal of 40%.

24% Minorities

U.S. Minority Representation

U.S. minorities comprise over 24% of salaried positions, aiming for 34% by 2030.

54% Leadership

Global Leadership Team Composition

Over half of the global leadership team are U.S. minorities.

2/3 Board

Board Member Diversity

Two-thirds of Board members identify as women or U.S. minorities.

10K Members

Inclusion Resource Groups

Eight Inclusion Eaton Resource Groups (iERGs) serve over 10,500 members globally.

100% Equality

Disability Equality Index

Received a perfect score of 100 on the Disability Equality Index for three consecutive years.

100% Equality

HRC Corporate Equality Index

Achieved a perfect score of 100% on the HRC Corporate Equality Index for eight consecutive years.

Company-wide pay equity assurance processes are in place for U.S. minority and global gender pay equity.
Eight Inclusion Eaton Resource Groups (iERGs) are present in 60 countries.
Awarded as one of the Best Companies for Women in India by Avtar & Seramount.
Received multiple global inclusion awards for commitment to diversity and inclusion.

Articles

Eaton’s Electrical Engineering Services & Systems

Turnkey electrical solutions

Transmission and distribution automation solutions