Lead Power Electronics Engineer at Eaton in Raleigh, NC | USD99,749-146,299 | Kablio

Role

Description

circuit design

data analysis

design optimization

power electronics

design leadership

team collaboration

Build and test circuits, analyze data, and optimize designs for performance, size, cost, manufacturability, and reliability.
Develop technical requirements and create reports and presentations.
Design, model, simulate, and develop power electronics, including analog and digital circuits for power conversion and protection.
Lead power electronics design and development, taking full ownership of assigned tasks.
Collaborate with mechanical, PCB layout, and firmware engineers to develop and validate designs.

Requirements

phd

pcb layout

simulink

power semiconductors

system architecture

strong communication

MS or Ph.D. in electrical engineering or equivalent with focus on power electronics.
Thorough understanding of PCB layout, EMC/EMI design practices, voltage clearance/creepage requirements, and insulation/interconnection techniques.
1157, or (iv) asylee under 8 U.S.C.
Minimum 4 years of experience with power converter hardware development and testing
Minimum 4 years of experience in power electronics modeling, simulation, and analysis experience using tools like Simulink, SPICE, or PLECS
Self-motivated and goal-oriented individual.
Strong knowledge of power semiconductors, passive components (e.g., high-frequency magnetics, power capacitors), and analog/digital circuit designs.
Ability to write reports, business correspondence, and technical documents.
Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C.
Bachelor's degree in engineering from an accredited institution with minimum 6 years work experience in power electronics designs and product development OR Master's degree in engineering from an accredited institution with minimum 4 years work experience in power electronics designs and product development
Strong communication and presentation skills.
Experience in power electronics system development, including development of power electronics system architecture and requirements
Experience with modern converter topologies, including AC/DC, DC/AC, and DC/DC (both non-isolated and isolated).
Position requires up to 10% travel

Benefits

Information not given or found

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

no immigration sponsorship or support will be provided for this position.

Security clearance

conditional offer includes a background check; candidates can explain any related convictions.

Company

Overview

Over 100 years

Years in operation

The company has been operational for over a century, demonstrating its long-standing presence in the industry.

Over 175 countries

Countries Operated

Eaton operates its business across 175 countries, showcasing its global reach and influence.

global leader in power management, providing energy-efficient solutions for managing electrical, hydraulic, and mechanical power.
products and services span across industrial, commercial, residential, and infrastructure markets.
innovative solutions in energy storage, electrical distribution, and industrial automation.
instrumental in advancing technologies for utilities, transportation, and energy management.
recent standout projects include large-scale energy management systems for smart cities and utilities.
systems are crucial for sectors ranging from renewable energy to water resources management.
history of growth through acquisitions, continuously expanding global footprint and product offerings.

Culture + Values

Develop employees by helping them succeed not just at work, but in life as well
Delight customers by understanding their challenges and delivering real solutions proactively
Deliver for shareholders by doing what's right
Support communities by offering time and talent to meet social and economic needs
We are ethical
We are passionate
We are accountable
We are efficient
We are transparent
We learn
Doing Business Right reflects unwavering commitment to highest ethical practices and standards of behavior
Our brand promise: we make what matters work

Environment + Sustainability

31% GHG Reduction

Operational Emissions Reduced

The company has reduced its operational greenhouse gas emissions by 31% since 2018, amounting to 302,845 metric tons of CO2 equivalents.

Carbon Neutral by 2030

Commitment to Carbon Neutrality

The company aims to achieve carbon-neutral operations by 2030, focusing on reducing carbon emissions across all operational activities.

58M Metric Tons (Scope 3)

Scope 3 Emissions in 2023

In 2023, the company reported Scope 3 greenhouse gas emissions of 58,449,862 metric tons of CO2 equivalents, reflecting emissions from the entire value chain.

$3B Invested

Sustainable R&D Funding

The company has committed over $3 billion to research and development for sustainable solutions, highlighting its investment in eco-friendly innovations.

Aiming to reduce Scope 1 and Scope 2 GHG emissions by 50% by 2030 compared to 2018 levels.
Targeting a 15% reduction in Scope 3 emissions by 2030 from 2018 levels.
Achieving zero-waste-to-landfill certification for 79% of manufacturing sites, up from 75% in 2022, with a 2030 target of 100%.
Certifying 16% of manufacturing sites as zero-water-discharge, surpassing the 2030 target of 10% for water-stressed sites.
Independent verification of Scope 1 and Scope 2 GHG data with reasonable assurance and Scope 3 data with limited assurance.
Deploying clean-energy projects such as solar microgrids, PV installations, and carports, reducing over 20,000 metric tons of CO2 equivalents annually.

Inclusion & Diversity

28% Women

Representation in Salaried Roles

Women make up nearly 28% of salaried positions, striving toward a 2030 goal of 40%.

24% Minorities

U.S. Minority Representation

U.S. minorities comprise over 24% of salaried positions, aiming for 34% by 2030.

54% Leadership

Global Leadership Team Composition

Over half of the global leadership team are U.S. minorities.

2/3 Board

Board Member Diversity

Two-thirds of Board members identify as women or U.S. minorities.

10K Members

Inclusion Resource Groups

Eight Inclusion Eaton Resource Groups (iERGs) serve over 10,500 members globally.

100% Equality

Disability Equality Index

Received a perfect score of 100 on the Disability Equality Index for three consecutive years.

100% Equality

HRC Corporate Equality Index

Achieved a perfect score of 100% on the HRC Corporate Equality Index for eight consecutive years.

Company-wide pay equity assurance processes are in place for U.S. minority and global gender pay equity.
Eight Inclusion Eaton Resource Groups (iERGs) are present in 60 countries.
Awarded as one of the Best Companies for Women in India by Avtar & Seramount.
Received multiple global inclusion awards for commitment to diversity and inclusion.

Articles

Eaton’s Electrical Engineering Services & Systems

Turnkey electrical solutions

Transmission and distribution automation solutions

Role

Description

circuit design

data analysis

design optimization

power electronics

design leadership

team collaboration

Build and test circuits, analyze data, and optimize designs for performance, size, cost, manufacturability, and reliability.
Develop technical requirements and create reports and presentations.
Design, model, simulate, and develop power electronics, including analog and digital circuits for power conversion and protection.
Lead power electronics design and development, taking full ownership of assigned tasks.
Collaborate with mechanical, PCB layout, and firmware engineers to develop and validate designs.

Requirements

phd

pcb layout

simulink

power semiconductors

system architecture

strong communication

MS or Ph.D. in electrical engineering or equivalent with focus on power electronics.
Thorough understanding of PCB layout, EMC/EMI design practices, voltage clearance/creepage requirements, and insulation/interconnection techniques.
1157, or (iv) asylee under 8 U.S.C.
Minimum 4 years of experience with power converter hardware development and testing
Minimum 4 years of experience in power electronics modeling, simulation, and analysis experience using tools like Simulink, SPICE, or PLECS
Self-motivated and goal-oriented individual.
Strong knowledge of power semiconductors, passive components (e.g., high-frequency magnetics, power capacitors), and analog/digital circuit designs.
Ability to write reports, business correspondence, and technical documents.
Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C.
Bachelor's degree in engineering from an accredited institution with minimum 6 years work experience in power electronics designs and product development OR Master's degree in engineering from an accredited institution with minimum 4 years work experience in power electronics designs and product development
Strong communication and presentation skills.
Experience in power electronics system development, including development of power electronics system architecture and requirements
Experience with modern converter topologies, including AC/DC, DC/AC, and DC/DC (both non-isolated and isolated).
Position requires up to 10% travel

Benefits

Information not given or found

Training + Development

Information not given or found

Interview process

Information not given or found

Visa Sponsorship

no immigration sponsorship or support will be provided for this position.

Security clearance

conditional offer includes a background check; candidates can explain any related convictions.

Company

Overview

Over 100 years

Years in operation

The company has been operational for over a century, demonstrating its long-standing presence in the industry.

Over 175 countries

Countries Operated

Eaton operates its business across 175 countries, showcasing its global reach and influence.

global leader in power management, providing energy-efficient solutions for managing electrical, hydraulic, and mechanical power.
products and services span across industrial, commercial, residential, and infrastructure markets.
innovative solutions in energy storage, electrical distribution, and industrial automation.
instrumental in advancing technologies for utilities, transportation, and energy management.
recent standout projects include large-scale energy management systems for smart cities and utilities.
systems are crucial for sectors ranging from renewable energy to water resources management.
history of growth through acquisitions, continuously expanding global footprint and product offerings.

Culture + Values

Develop employees by helping them succeed not just at work, but in life as well
Delight customers by understanding their challenges and delivering real solutions proactively
Deliver for shareholders by doing what's right
Support communities by offering time and talent to meet social and economic needs
We are ethical
We are passionate
We are accountable
We are efficient
We are transparent
We learn
Doing Business Right reflects unwavering commitment to highest ethical practices and standards of behavior
Our brand promise: we make what matters work

Environment + Sustainability

31% GHG Reduction

Operational Emissions Reduced

The company has reduced its operational greenhouse gas emissions by 31% since 2018, amounting to 302,845 metric tons of CO2 equivalents.

Carbon Neutral by 2030

Commitment to Carbon Neutrality

The company aims to achieve carbon-neutral operations by 2030, focusing on reducing carbon emissions across all operational activities.

58M Metric Tons (Scope 3)

Scope 3 Emissions in 2023

In 2023, the company reported Scope 3 greenhouse gas emissions of 58,449,862 metric tons of CO2 equivalents, reflecting emissions from the entire value chain.

$3B Invested

Sustainable R&D Funding

The company has committed over $3 billion to research and development for sustainable solutions, highlighting its investment in eco-friendly innovations.

Aiming to reduce Scope 1 and Scope 2 GHG emissions by 50% by 2030 compared to 2018 levels.
Targeting a 15% reduction in Scope 3 emissions by 2030 from 2018 levels.
Achieving zero-waste-to-landfill certification for 79% of manufacturing sites, up from 75% in 2022, with a 2030 target of 100%.
Certifying 16% of manufacturing sites as zero-water-discharge, surpassing the 2030 target of 10% for water-stressed sites.
Independent verification of Scope 1 and Scope 2 GHG data with reasonable assurance and Scope 3 data with limited assurance.
Deploying clean-energy projects such as solar microgrids, PV installations, and carports, reducing over 20,000 metric tons of CO2 equivalents annually.

Inclusion & Diversity

28% Women

Representation in Salaried Roles

Women make up nearly 28% of salaried positions, striving toward a 2030 goal of 40%.

24% Minorities

U.S. Minority Representation

U.S. minorities comprise over 24% of salaried positions, aiming for 34% by 2030.

54% Leadership

Global Leadership Team Composition

Over half of the global leadership team are U.S. minorities.

2/3 Board

Board Member Diversity

Two-thirds of Board members identify as women or U.S. minorities.

10K Members

Inclusion Resource Groups

Eight Inclusion Eaton Resource Groups (iERGs) serve over 10,500 members globally.

100% Equality

Disability Equality Index

Received a perfect score of 100 on the Disability Equality Index for three consecutive years.

100% Equality

HRC Corporate Equality Index

Achieved a perfect score of 100% on the HRC Corporate Equality Index for eight consecutive years.

Company-wide pay equity assurance processes are in place for U.S. minority and global gender pay equity.
Eight Inclusion Eaton Resource Groups (iERGs) are present in 60 countries.
Awarded as one of the Best Companies for Women in India by Avtar & Seramount.
Received multiple global inclusion awards for commitment to diversity and inclusion.

Articles

Eaton’s Electrical Engineering Services & Systems

Turnkey electrical solutions

Transmission and distribution automation solutions