Senior Electrical Designer

Description

• Model Cable tray supports / Supports for field devices
• Provide technical assistance for pre-commissioning, energization, commissioning, and start-up, as required by
• Prepare bills of material and perform MTO of electrical items
• Create all design drawings to allow the interface to vendor packages with the remainder of the facility including I&CS
• Manage site design technical issues and coordinate with office personnel to resolve as needed
• Lighting Layout Drawings
• Function as electrical design project lead or electrical task lead if required
• Extract Drawings
• Model Electrical field devices
• Create and issue required MTO for vendor package interfaces
• Provide detailed technical support and coordination for Site Acceptance Testing (SAT) of electrical equipment
• Carefully evaluate, communicate, and manage change with full awareness of project impact
• Provide support for vendor packages, including (but not limited to) the following:

Create and issue required MTO for vendor package interfaces

Create all design drawings to allow the interface to vendor packages with the remainder of the facility including I&CS

Perform design review of supplier documents for electrical and non-electrical packages

Provide support for the Inspection and Factory Acceptance Testing (FAT) of electrical equipment, motors, and associated skids

• Cable tray sizing calculations
• Report to and coordinate with the electrical design lead or lead engineer for assigned tasks
• Apply thorough working knowledge to prepare and oversee the development of key project deliverables, including (but not limited to) the following:

Block Diagrams

Area Classification Drawings

One-line diagrams

Typical Installation Drawings

Motor control schematics

Panel Schedules

MCT Schedules

Lighting Layout Drawings

Cable tray drawings

Earthing layouts

Building Layouts

MCT Layouts

Tray support location Plans

Cable tray sizing calculations

Conduit & cable schedules

AG/UG power drawings

Interconnection & Wiring drawings

Prepare bills of material and perform MTO of electrical items

• Assist electrical designers and coordinate with electrical engineers and design lead on assigned tasks
• Perform design review of supplier documents for electrical and non-electrical packages
• Model Cable trays
• Support Project Development and Coordination, including (but not limited to) the following:

Maintain and promote a focus on McDermott’s end-product throughout engineering, fabrication, or construction

Function as electrical design project lead or electrical task lead if required

Become familiar with the project contract, scope of work, basis of design, specifications, and schedule

Report to and coordinate with the electrical design lead or lead engineer for assigned tasks

Assist electrical designers and coordinate with electrical engineers and design lead on assigned tasks

Maintain close coordination with other discipline designers and engineers

Carefully evaluate, communicate, and manage change with full awareness of project impact

Assume responsibility for schedule, quantity, and quality of assigned task deliverables

• Maintain close coordination with other discipline designers and engineers
• Work in 3D modeling tool to perform the following:

Model Cable trays

Model Electrical Equipment

Model Electrical field devices

Model Cable tray supports / Supports for field devices

Model Penetrations

Model Cable trenches

Extract Drawings

Extract MTO

Clear Clashes / TDL

• Building Layouts
• Model Electrical Equipment
• Model Cable trenches
• Assume responsibility for schedule, quantity, and quality of assigned task deliverables
• Provide off-site and/or on-site technical design support to Construction personnel
• Maintain and promote a focus on McDermott’s end-product throughout engineering, fabrication, or construction
• Provide support for the Inspection and Factory Acceptance Testing (FAT) of electrical equipment, motors, and associated skids
• Extract MTO

Requirements

• Clear Clashes / TDL
• Experience with MS Office Suite including Excel and Word
• Possess detailed knowledge of the content and application of standards, codes, and guidelines, including NEC, NFPA, IEEE, and ANSI
• Experience using AutoCAD/Microstation/Smartsketch, SP3D/E3D/PDMS is must
• Diploma in Electrical and Electronics Engineering
• Technical knowledge of the detailed design process and sequences
• Motor control schematics
• Become familiar with the project contract, scope of work, basis of design, specifications, and schedule
• Experience with Dialux / Chalmlite for lighting calculation and Roxtec Tool for MCT sizing is preferred
• Ability to lead tasks with minimal direction and supervision
• AG/UG power drawings
• Construction Site Support Experience, including (but not limited to) the following:

Provide off-site and/or on-site technical design support to Construction personnel

Manage site design technical issues and coordinate with office personnel to resolve as needed

Provide detailed technical support and coordination for Site Acceptance Testing (SAT) of electrical equipment

Provide technical assistance for pre-commissioning, energization, commissioning, and start-up, as required by

• Prefer experience on large-cap (>$500 million) EPC project
• Prefer construction site experience
• Ability to check 3D model and deliverables prepared by other designers
• Minimum of 12 years of detailed electrical design experience

Benefits

• Tray support location Plans

Training + Development

Interview process

Visa Sponsorship

Security clearance