Field Layout Engineer 2

Description

• Lays out column center lines and wall locations, and verifies that exterior skin is not encroached by main structure.
• Responsible for care, maintenance, and calibration of engineering equipment.
• Verify existing elevations shown on drawings used on roadways and utilities.
• Assist with the coordination of shop drawings with contract drawings, verifies accuracy, and proposes solutions to discrepancies between the drawings.
• Assist other project staff in securing certified layout from independent engineering resources to establish monument and baseline control and to verify building corners and roadway entrances.
• Compile and maintain project record and as-built documents. Ensures storage protocols are followed.
• Establishes building corners and permanent reference points to allow back checks of building location.
• Calculates earth, rock, and concrete quantities accurately.
• Plumbs structural steel frame and check column alignments.
• Assist other project staff with quality, planning, safety, or other project-related activities.
• Checks slab for elevation and alignment during concrete pours.
• Sets and maintains benchmarks and control lines on each floor for use in layout, and verify that workers are using proper elevations and control lines.
• Performs as-built surveys to verify correct placement of work and to identify conflicts between items of work (i.e., where concrete slab edge or walls have encroached on the exterior skin), and may help maintain as-built drawings.
• Helps to mentor less experienced Layout team members and reports progress to supervisor and other management team members.
• Communicates clearly and effectively with project team and trade partners to ensure layout of contract document standards are met.
• Plans, sets up, and maintains layout control for assigned construction project(s) and identifies unacceptable errors.

Requirements

• General knowledge of means and methods of construction management.
• In lieu of the above requirements, relevant experience will be considered
• Knowledge of LEAN construction principals.
• Valid and unrestricted drivers license required
• Capable of independently completing non-routine construction site layout and controls for a project.
• Bachelor’s degree in construction management (Preferred)
• Ability to perform work accurately and completely, and in a timely manner.
• Ability to build relationships and collaborate within a team, both internally and externally.
• Communication skills, verbal and written – Intermediate.
• 5+ Years construction layout experience (Required)
• Proficiency in MS Office – Basic.

Benefits

• Gain a working knowledge of organizational structure and resources provided.

Training + Development

Interview process

Visa Sponsorship

Security clearance