Millwright II

Description

• Will unload, inspect, move and set equipment into position using cranes, hoists, dollies, rollers and trucks
• Assembles machines and bolts, welds, rivets and fastens machinery to foundations or other structures using hand tools and power tools.
• Operates engine lathes, grinders and files.
• Assembles and installs equipment such as shafting, conveyors and tram rails
• Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools.
• Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.
• Uses rigging and hoisting devices such as chokers, chain falls and come alongs to move equipment / materials into place
• Fabricates and installs parts, equipment and machinery by measuring, cutting, drilling and/or welding
• Will replace gaskets and other defective parts on machinery.
• Conducts preventative maintenance such as lubrication and fixing or repairing worn parts.
• Will dismantle machines using hammers, wrenches, crowbars and other hand tools
• Will occasionally work at heights, climb ladders and stairways and work off of platforms.
• Turns machine parts to dimensional specifications
• Works with industry-specific and high complex machines including but not limited to: ball mills, ID fans, lube coil skids, turbines, conveyors, generators, hydraulic systems, pumps, gears, bearings, compressors etc.
• Will plan, inspect, verify and document scope of work

Requirements

• Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting.
• Good aptitude and manual dexterity.
• Good reading comprehension.
• Minimum 4-5 years industrial mechanical experience.
• Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day.
• Demonstrated ability to lead others and provide detailed instructions.
• Organization and time management.
• Will talk and hear to communicate.
• Must know how to read blueprints, schematic drawings and engineering specifications andunderstand how to read and interpret technical manuals in order to determine work procedures
• Former Zachry Employee.
• Basic Computer efficiency
• Demonstrated industrial construction/maintenance history experience
• Good communication skills with co-workers and supervisors.
• Must have experience using industrial hand tools and power tools
• Must have reliable transportation and be able to work 7 days as needed.
• Formal/technical education.
• May be required to lift, carry and move up to 50lbs.
• Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision.
• Understand load properties of cables, ropes, hoists and chains.
• Ability to work with others – team player.
• Knowledge of hand tools, and power tools.
• Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls.
• Ability to work independently – minimal supervision.
• National Center for Construction Education and Research’s (NCCER) Certification for Journeyman Industrial Millwright.
• Must have general experience with industrial machinery installation, repair and maintenance.
• Knowledge of math concepts, geometry and layout.
• Good problem-solving abilities.
• Knowledge of industrial machinery and equipment

Benefits

Training + Development

Interview process

Visa Sponsorship

Security clearance