Critical Facility Technician 3 - TS/SCI with Polygraph

Description

• Identify required materials and parts for maintenance and repair to facilitate procurement.
• Daily walk-through of facility documenting parameters such as power availability, temperature and humidity, alarm status, etc. to be catalogued and compared for identification of discrepancies and trends.
• May use a standard ladder without exceeding the weight limit while carrying tools.
• Apply general rules to specific problems to produce answers that make sense.
• If applicable to the role, disables and enables fire alarm control panels and systems.
• Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
• Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
• Interprets building codes and local and federal regulations as they relate to installations and applies them as required by the site.
• Maintain maintenance records as required by City, State, and EPA regulations.
• Relocates a 12-foot stepladder without assistance.

Requirements

• Prefer candidates who are capable of utilizing appropriate test equipment, including infrared scanning and vibration analyzing meter, to perform system and equipment diagnostics.
• Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
• Requires meeting all requirements of CET 2. Mechanical and/or electrical OEM factory specific training or experience preferred. Strong verbal and written communication skills required.
• Listen to and understand information and ideas presented through spoken words and sentences.
• Understands the refrigeration cycles to include identifying components in advanced refrigeration circuits, understanding how each component works, diagnosing and correcting problems in the refrigeration circuit, using manifold gauge set, pressure/temperature chart and temperature measuring devices for routine maintenance and to troubleshoot.
• Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
• Ability to use hand tools and test equipment to install, troubleshoot, and repair new or replacement parts for existing mechanical and electrical equipment covered under CET3 classified procedures, according to specifications and established safety guidelines, relying on MOP's, manufacturer's literature, and industry best practices to perform tasks under supervision, and ensures activities are logged in CMMS.
• Understands the heating cycle to include identifying components in heating system, understanding how each component works, diagnosing problems in the heating system using a gas pressure test and other devices for routine maintenance and to troubleshoot and repair.
• Utilizes safe working practices; can apply lockout/tagout, SDS, applies good housekeeping methods, etc. Ability to type and utilize common administrative and office software.
• Understand how to action all site primary and secondary EOP's, focusing on mastering the first responder role during an emergency. Fully conversant on how to complete drills associated with the site primary and secondary EOP's.
• High School Diploma or equivalent with minimum 8+ years of experience with electrical, mechanical, and fire/life safety equipment.
• Ability to read and interpret wiring diagrams, blueprints, floor plans, construction documents, mechanical riser drawings, OEM operating and maintenance instructions, job specifications, and MOP/SOPs.
• Conversant in site-specific processes and procedures such as procedure creation and review standards, procedure instructions and templates, how to report an incident or outage, procedure execution, PM standards, CMMS standards and policy, work order and notification, as well as the use of SharePoint to access CE procedures and training content.
• Knowledge of power density and parity with HVAC system capacities, and cooling and heat load/loss calculations.
• Active TS/SCI with Polygraph Required
• Understand the function, purpose, nominal operating parameters, and how to operate/isolate and start up: MV/LV Distribution Boards, MV/LV Breakers, UPS, Generator, Batteries, STS, ATS, AHU, DX units, Chillers, Evap Washer Systems, CRAC Units, Fuel Systems, ASCO Systems, BMS System, EPMS System, and Fire Alarm System.
• Capable of assisting a CET3/4 technician with CET3 classified procedures (MOP/SOP) associated with the site/campus they are based; and ability to transfer knowledge and train other technicians.
• Conversant of the BMS and EPMS systems and the impact of any state change, capable of navigating the system, interpreting alarms, and able to perform controlled shutdowns/start-ups/equipment rotations.
• Possess a Journeyman Electrician License, Journeyman HVAC license or equivalent.
• The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety.

Benefits

Training + Development

Interview process

Visa Sponsorship

Security clearance