Heavy Equipment Operator

Description

• Negotiate rough terrain.
• Perform all associated job functions of a laborer, which includes, but is not limited to: constant physical labor such as shoveling, using sledge or claw hammers, mixing or breaking concrete, operating pipe or chain saws, carrying equipment or materials, or any other related duty.
• Grease the equipment daily.
• Keep equipment clean from dirt and excess grease.
• Carry and use trade associated tools, equipment, or material up to a weight of 95 pounds.
• Stand, stoop, bend, reach, climb, walk, or sit.
• Report all equipment breakdowns immediately.
• Inspect and conduct general maintenance to the equipment.
• Take direction from the Foreman or in their absence their designated appointee.
• Assist the crew in other useful work as directed, when the machine is not in use.
• Maintain the following tools to make minor repairs and adjustments.
• Attend weekly tool-box talks and all other company safety meetings.
• Climb up and down from equipment either to operate it or to perform routine maintenance checks.
• Change buckets on equipment.
• Always be near or on the machine during the day unless you are directed otherwise by a supervisor.
• Visually check for utilities, if utility locates are not marked or cannot be defined.
• Operate the equipment in a proper and safe manner in support of underground utility projects.
• Check oil, battery, transmission, hydraulic systems, tires, radiators, tracks, and back-up alarms for the proper levels or operation prior to starting the day's work. An equipment inspection report must be filled out and turned in weekly to either your foreman or your designated shop facility.
• Assist the fuel driver in fueling your equipment.

Requirements

• Must possess a current DC Operators License.
• 10" or 12" Adjustable Wrench
• Must have 2 years of prior experience operating an excavator in support of underground utility projects.
• Work in all types of weather conditions or climate, unless there is an immediate threat of danger.
• Must be able to pass a pre-employment drug screen.
• Standard Socket Set from 3/8" to 3/4"
• Have adequate vision to observe and follow hand signals.
• 1/2" Drive Ratchet
• Large and Small Phillips Head Screwdrivers
• BOTH DC RESIDENTS AND NON-DC RESIDENTS NEEDED***
• Standard Wrench Set from 3/8" to 3/4"
• Large and Small Slotted Head Screwdrivers
• Climb in and out of manholes, excavations, and/or other confined or enclosed spaces.
• The position of an operator requires the individual to possess the physical ability to perform the following task for a minimum of 8 hours per day.
• Knowledgeable about the machine, its correct method of operation, and limitations.

Benefits

Training + Development

Interview process

Visa Sponsorship

Security clearance