Fiber Technician II

Description

• The Fiber Technician will terminate & breakout outside plant (loose tube) fiber (e.g. Corning/Commscope)
• The Fiber Technician troubleshoots using an OTDR to identify and correct problems end to end, and Network-wide
• The Fiber Technician will terminate & breakout outside plant (loose tube) fiber (e.g. 3DNX)
• Operate highly specialized test and fiber optic splicing equipment.
• The Fiber Technician will build closets (Mount and install backboards, cross-connects, racks, patch panels, fiber optic, and hardware). Install grounding for racks, equipment, and cable as required. Complete all IDC connections (e.g. terminate 110/66 blocks and patch panels).
• The Fiber Technician will perform mechanical splicing with all types of fiber cable
• The Fiber Technician will terminate indoor tight buffered multimode and single-mode fiber
• The Fiber Technician will install a work area outlet for the floor, modular furniture, and wall (terminate CAT 3 & CAT 5 jacks. Mount faceplates and surface mount boxes correctly. Adhere to IES COMMUNICATIONS labeling standards).
• The Fiber Technician performs building entrance splices, maintenance space, and direct buried splices
• The Fiber Technician performs testing, continuity test horizontal and riser cable, use of volt-ohmmeter, troubleshoot opens, crosses, shorts, and transpose pairs on horizontal and riser cable.
• The Fiber Technician must promote the Company culture and mission to all employees, vendors, clients, and business partners.
• The Fiber Technician will perform fusion splicing with all types of fiber cable
• The Fiber Technician installs LC, SC, ST, FC, FDDI, SMA, and MPO/MTP connectors, for both multi-mode & single-mode fiber
• The Fiber Technician will calculate the end to end loss budgets in accordance with TIA/EIA standards for multimode & single-mode fiber
• The Fiber Technician will install fan-out kits including buffer tube

Requirements

• The Fiber Technician must be able to work at heights, off of a ladder, and in confined spaces, lift up to 50 pounds and move up to 75 pounds.
• The Fiber Technician must be self-motivated, positive in approach, professional, and help create, develop, and implement project process improvement(s).
• Prefer Mechanical and Fusion Splice experience
• Prefer Industry Certifications (Corning/FOA)
• The Fiber Technician must possess and be proficient with the listed tools.
• The Fiber Technician will test using an OTDR, Fluke DTX 180
• Prefer 3-5 years of experience in Fiber
• Must have experience splicing fiber
• Must have your own Truck, Van or SUV
• Must possess and be proficient with the listed tools.
• Must be able to meet IES driving standards policy
• The Fiber Technician must be able to travel within the branch territory and/or regional territory as needed.
• The Fiber Technician will terminate simplex & duplex jumper cord
• Must possess a High School diploma or GED equivalent
• A Minimum of 2-4 years of Plant Maintenance background or previous fiber optic experience or technical schooling equivalent to meet company requirements.
• Prefer Data Center installation experience
• Regular attendance is mandatory
• Must be able to use the following trade Tools: Screwdriver (regular and Phillips), drywall saw, torpedo level, tape measure, snips (with belt sheath), pliers (needle nose and channel locks), hammer, wrench set, cable stripper, flashlight and gloves. Punch tool with 110 block and 66 block blade, 6/8 position combo crimp tool, and Krone/3M/BIX.
• Extensive knowledge of all CATV equipment.
• Must possess the ability to read and understand manufacture’s manuals for operating and repairing of electronic equipment and components.
• The Fiber Technician will fully complete all IES paperwork accurately and on time specifically, timesheets, material transfers, work orders, change orders, Job Blog, tool transfers and others as required
• Prefer OSP / Confined Space Entry experience (splicing)
• The Fiber Technician must have basic copper termination skills
• Must have Testing & Troubleshooting MMF & SMF systems experience (OTDR & PMLS)
• The Fiber Technician must be able to act as the Company liaison for interface with customer representative(s).
• Have basic knowledge of fiber optic systems, RF plant, and test equipment.
• The Fiber Technician must possess proven problem-solving skills, critical thinking skills, and the ability to effectively read, write, and give oral presentation(s).
• Must be proficient at terminating all connector types and methods for SMF and MMF systems (Unicam, anaerobic, heat-cure)
• Must possess a valid driver’s license as well as a good driving record.
• The Fiber Technician must be able to see and distinguish different colors, read the small print, and hear and recognize audible signals such as dial tones.

Benefits

Training + Development

Interview process

Visa Sponsorship

Security clearance